JRM Online: Find a Tine

Selecting the Correct Tine

There are several important characteristics that one should keep in mind when deciding which JRM tine to order. Most JRM tines when compared to comparable OEM tines have a wall that is slightly thicker. This is necessary to provide the extra wear. In the design process it was decided that about 1/3 of the additional wall thickness would be distributed to the ID (Inside Diameter) and the remaining 2/3rds would go to the OD (Outside Diameter). These ratios vary slightly from tine to tine, but the principle is true of most JRM conventional tines. Because of the increased wall thickness and the resulting smaller core diameter (ID), it is often desirable to select a JRM tine that is listed as one size above the OEM tine you have historically used. For example, instead of a 1/2” OEM coring tine one might wish to use a 5/8” JRM tine.

In selecting the proper JRM tine you must first know the following:

Maximum length tine that your machine will accept (this information should be available from the manufacturer.)
The mount size (in inches) of the tine holder--you may also simply mea sure one of the tines you are presently using. [Most manufacturers offer several options when a new machine is purchased.]
What is the soil composition you are likely to be encountering...if you are likely to encounter (rocks, push-up greens, or USGA spec soil). A top eject coring tine is structurally stronger than a side-eject coring tine.
Is your aerification machine setup with the proper timing?
Carefully check the ID of the tine you are considering since this will be the core size with coring tines.

To find tines that match your criteria please select the options below and press the "Find a Tine" button.

Type

Mount Size

Length

View All Tines

Please select a tine from below...

Miscellaneous - Blocks, Rake Prongs, Adapters
1B375101 Click here for more information	3/8" Quad Tine Holder for Toro® Walking Greens Aerifier. Set=4 Blocks Length: 0 Mount Size: 0 Price: $87.40 Add to Order Form

Miscellaneous - Blocks, Rake Prongs, Adapters
1B375103 Click here for more information	3/8" Quad Tine Holder for John Deere 1500 (also fits 2000) 9" long, 7 holes Set=6 blocks Length: 0 Mount Size: 0 Price: $120.20 Add to Order Form

Miscellaneous - Blocks, Rake Prongs, Adapters
1B500101 Click here for more information	1/2" Super Quad Block for Toro® Walking Greens Aerifier. Set=6 Blocks Length: 0 Mount Size: 0 Price: $120.20 Add to Order Form

Miscellaneous - Blocks, Rake Prongs, Adapters
1B500102 Click here for more information	1/2" SuperQuad Block for John Deere® 1500 (also fits 2000) 9" long, 7 holes Set=6 Blocks Length: 0 Mount Size: 0.5 Price: $120.20 Add to Order Form

Miscellaneous - Blocks, Rake Prongs, Adapters
1B625102 Click here for more information	5/8" MagQuad Block For Toro®, accepts 5/8" mounts only, 6 holes Length: 0 Mount Size: 0 Price: $163.80 Add to Order Form

Miscellaneous - Blocks, Rake Prongs, Adapters
1B625103 Click here for more information	5/8" MagQuad Block for John Deere® 1500 (also fits 2000) 9" long, 7 holes. Length: 0 Mount Size: 0 Price: $163.80 Add to Order Form

Conventional Coring Tines - Replaces Coremaster® Parts
1C500101 Click here for more information	Premium Coring Tine 1/2" x 4.50" with .725" Mounting Diameter I.D. .390", O.D. .550" Wall .072" Length: 4.5 Mount Size: 0.725 Price: $4.05 Add to Order Form

Conventional Coring Tines - Replaces Coremaster® Parts
1C500501 Click here for more information	DILLENNIUM® Coring Tine 1/2" x 4.75" with .725" Mounting Diameter ID .350" OD .525" Wall .072" Length: 4.75 Mount Size: 0.725 Price: $10.85 Add to Order Form

Conventional Coring Tines - Replaces Coremaster® Parts
1C625101 Click here for more information	Premium Coring Tine 5/8" x 4.50" with .835" Mounting Diameter ID .495" OD .650" Wall .072 Length: 4.5 Mount Size: 0.835 Price: $4.05 Add to Order Form

Conventional Coring Tines - Replaces Coremaster® Parts
1C625501 Click here for more information	DILLENNIUM® Coring Tine 5/8" x 4.75" with .835" Mounting Diameter ID .485" OD .633" Wall .072" Length: 4.75 Mount Size: 0.835 Price: $10.85 Add to Order Form

Conventional Coring Tines - Replaces Coremaster® Parts
1CS375501 Click here for more information	DILLENNIUM® Coring Tine 3/8", Side Eject 4.75" with .725" Mounting Diameter ID .270" OD .425" Wall .072" Length: 4.75 Mount Size: 0.725 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces Coremaster® Parts
1CS500501 Click here for more information	DILLENNIUM® Coring Tine, Side Eject, 1/2" x 4.75" with .725" Mounting Diameter ID .350" OD .525" Wall .072" Length: 4.75 Mount Size: 0.725 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1D375101 Click here for more information	Premium 3/8" Coring Tine 5 1/2" x 5/8" Mounting Diameter ID .285" OD .429" Wall .072" Length: 5.5 Mount Size: 0.625 Price: $4.50 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1D500101 Click here for more information	Premium Coring Tine 1/2" x 5.50" with 3/4" Mounting Diameter ID .390" OD .557" Wall .072" Length: 5.5 Mount Size: 0.75 Price: $4.50 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1D500103 Click here for more information	Premium Coring Tine 1/2" x 4.25" with 5/8" Mounting Diameter ID .380" OD .540" Wall .072" Length: 4.25 Mount Size: 0.625 Price: $4.05 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1D500104 Click here for more information	Premium Coring Tine 1/2" x 4.75" with 3/4" Mounting Diameter ID .390" OD .557" Wall .072" Length: 4.75 Mount Size: 0.75 Price: $4.05 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1D500105 Click here for more information	Premium Coring Tine 1/2" x 6.00" with 3/4" Mounting Diameter ID .390" OD .550" Wall .072" Length: 6 Mount Size: 0.75 Price: $4.50 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1D500501 Click here for more information	DILLENNIUM® Coring Tine 1/2" x 5.75" with 3/4" Mounting Diameter ID .350" OD .525: Wall .072 Length: 5.75 Mount Size: 0.75 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1D500503 Click here for more information	DILLENNIUM® Coring Tine 1/2" x 4.50" with 5/8" Mounting Diameter ID .350" OD .525" Wall .072" Length: 4.5 Mount Size: 0.625 Price: $10.85 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1D500504 Click here for more information	DILLENNIUM® Coring Tine 1/2" x 5.00" with 3/4" Mounting Diameter ID .350" OD .525" Wall .072" Length: 5 Mount Size: 0.75 Price: $10.85 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1D500505 Click here for more information	DILLENNIUM® Coring Tine 1/2" x 6.25" with 3/4" Mounting Diameter ID .350" OD .525" Wall .072" Length: 6.25 Mount Size: 0.75 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1D625101 Click here for more information	Premium Coring Tine 5/8" x 5.50" with 3/4" Mounting Diameter ID .490" OD .655" Wall .072" Length: 5.5 Mount Size: 0.75 Price: $4.50 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1D625103 Click here for more information	Premium Coring Tine 5/8" x 4.25" with 3/4" Mounting Diameter ID .480" OD .650" Wall .072" Length: 4.25 Mount Size: 0.75 Price: $4.05 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1D625104 Click here for more information	Premium Coring Tine 5/8" x 4.75" with 3/4" Mounting Diameter ID .480" OD .650" Wall .072" Length: 4.75 Mount Size: 0.75 Price: $4.05 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1D625105 Click here for more information	Premium Coring Tine 5/8" x 6" with 3/4" Mounting Diameter ID .490" OD .655" Wall .072" Length: 6 Mount Size: 0.75 Price: $4.50 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1D625501 Click here for more information	DILLENNIUM® Coring Tine 5/8" x 5.75" with 3/4" Mounting Diameter ID .485" OD .633" Wall .072" Length: 5.75 Mount Size: 0.75 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1D625503 Click here for more information	DILLENNIUM® Coring Tine 5/8" x 4.50" with 3/4" Mounting Diameter ID .485" OD .633" Wall .072" Length: 4.5 Mount Size: 0.75 Price: $10.85 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1D625504 Click here for more information	DILLENNIUM® Coring Tine 5/8" x 5.00" with 3/4" Mounting Diameter ID .485" OD .633" Wall .072" Length: 5 Mount Size: 0.75 Price: $10.85 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1D625505 Click here for more information	DILLENNIUM® Coring Tine 5/8" x 6.25" with 3/4" Mounting Diameter ID .485" OD .633" Wall .072" Length: 6.25 Mount Size: 0.75 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1D750101 Click here for more information	Premium 3/4" Coring Tine 6" x 7/8" Mount Diameter ID .585" OD .775" Wall .095" Length: 6 Mount Size: 0.875 Price: $4.65 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1D750501 Click here for more information	DILLENNIUM® 3/4" Coring Tine 3/4" x 6.25" with 7/8" Mounting Diameter ID .535" OD .745" Wall .095" Length: 6.25 Mount Size: 0.875 Price: $13.35 Add to Order Form

Lite Tines
1DL500501 Click here for more information	DILLENNIUM® Lite Coring Top Eject Coring Tine 1/2" x 4 1/2" with 5/8" mounting diameter ID .406" OD .543" Wall .055" Length: 4.5 Mount Size: 0.625 Price: $9.50 Add to Order Form

Lite Tines
1DL500502 Click here for more information	DILLENNIUM® Lite Coring Tine 1/2" x 5" with 3/4" mounting diameter ID .406" OD .543" Wall .055" Length: 5 Mount Size: 0.75 Price: $9.50 Add to Order Form

Lite Tines
1DL500503 Click here for more information	DILLENNIUM® Lite Coring Tine 1/2" x 6" with 3/4" mounting diameter ID .406" OD .543" Wall .055" Length: 6 Mount Size: 0.75 Price: $9.50 Add to Order Form

Lite Tines
1DL625501 Click here for more information	DILLENNIUM® Lite Coring Tine 5/8" x 4 1/2" with 3/4" mounting diameter. ID .502" OD .642" Wall .055" Length: 4.5 Mount Size: 0.75 Price: $10.05 Add to Order Form

Lite Tines
1DL625502 Click here for more information	DILLENNIUM® Lite Coring Tine 5/8" x 5" with 3/4" mounting diameter ID .502" OD .642" Wall .055" Length: 5 Mount Size: 0.75 Price: $10.05 Add to Order Form

Lite Tines
1DL625503 Click here for more information	DILLENNIUM® Lite Coring TIne 5/8" x 6" with 3/4" mounting diameter ID .502" OD .642" Wall .055" Length: 6 Mount Size: 0.75 Price: $10.05 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS375101 Click here for more information	Premium 3/8" Coring Tine, side eject 5 1/2" x 3/4" Mount Diameter ID .285" OD .429" Wall .072 Length: 5.5 Mount Size: 0.75 Price: $5.35 Add to Order Form

New Products
1DS375101 Click here for more information	Premium 3/8" Coring Tine, side eject 5 1/2" x 3/4" Mount Diameter ID .285" OD .429" Wall .072 Length: 5.5 Mount Size: 0.75 Price: $5.35 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS375501 Click here for more information	DILLENNIUM® Coring Tine, Side Eject, 3/8" x 5.75" with 3/4" Mounting Diameter ID .270" OD .425" Wall .072" Length: 5.75 Mount Size: 0.75 Price: $13.35 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS375503 Click here for more information	DILLENNIUM® Coring Tine, Side Eject, 3/8" x 4.50" with 5/8" Mounting Diameter ID .270" OD .425" Wall .072" Length: 4.5 Mount Size: 0.625 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS375504 Click here for more information	DILLENNIUM® Coring Tine, Side Eject 3/8" X 5.00" with 3/4" Mounting Diameter ID .270 OD .425" Wall .072" Length: 5 Mount Size: 0.75 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS375801 Click here for more information	INFINITY 3/8" Side-Eject Tine, 5.5" long x 3/4" mount; .285 ID, .429 OD, .072 wall. Length: 5.5 Mount Size: 0.75 Price: $12.35 Add to Order Form

New Products
1DS375801 Click here for more information	INFINITY 3/8" Side-Eject Tine, 5.5" long x 3/4" mount; .285 ID, .429 OD, .072 wall. Length: 5.5 Mount Size: 0.75 Price: $12.35 Add to Order Form

INFINITY tines
1DS375801 Click here for more information	INFINITY 3/8" Side-Eject Tine, 5.5" long x 3/4" mount; .285 ID, .429 OD, .072 wall. Length: 5.5 Mount Size: 0.75 Price: $12.35 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS500101 Click here for more information	Premium 1/2" Coring Tine, side eject 5 1/2" x 3/4" Mount Diameter ID .390" OD .550" Wall .072 Length: 5.5 Mount Size: 0.75 Price: $4.50 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS500105 Click here for more information	Premium 1/2" Coring Tine, side eject 6" x 3/4" Mount Diameter ID ..390" OD .550" Wall .072 Length: 6 Mount Size: 0.75 Price: $5.35 Add to Order Form

New Products
1DS500105 Click here for more information	Premium 1/2" Coring Tine, side eject 6" x 3/4" Mount Diameter ID ..390" OD .550" Wall .072 Length: 6 Mount Size: 0.75 Price: $5.35 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS500501 Click here for more information	DILLENNIUM® Coring Tine, Side Eject, 1/2" x 5.75" with 3/4" Mounting Diameter ID .270" OD .425" Wall .072" Length: 5.75 Mount Size: 0.75 Price: $13.35 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS500503 Click here for more information	DILLENNIUM® Coring Tine, Side Eject, 1/2" x 4.50" with 5/8" Mounting Diameter ID .350" OD .525" Wall .072" Length: 4.5 Mount Size: 0.625 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS500504 Click here for more information	DILLENNIUM® Coring Tine , Side Eject, 1/2" 5.00" with 3/4" Mounting Diameter ID .350" OD .525" Wall .072" Length: 5 Mount Size: 0.75 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS500505 Click here for more information	DILLENNIUM® Coring Tine, Side Eject, 1/2" x 6.25" with 3/4" Mounting Diameter ID .305" OD .525" Wall .072" Length: 6.25 Mount Size: 0.75 Price: $13.35 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS500801 Click here for more information	INFINITY 1/2" Side-Eject tine. 5 1/2" length, 3/4" mount; .390" ID, .550" OD, .072" wall. Length: 5.5 Mount Size: 0.75 Price: $12.35 Add to Order Form

New Products
1DS500801 Click here for more information	INFINITY 1/2" Side-Eject tine. 5 1/2" length, 3/4" mount; .390" ID, .550" OD, .072" wall. Length: 5.5 Mount Size: 0.75 Price: $12.35 Add to Order Form

INFINITY tines
1DS500801 Click here for more information	INFINITY 1/2" Side-Eject tine. 5 1/2" length, 3/4" mount; .390" ID, .550" OD, .072" wall. Length: 5.5 Mount Size: 0.75 Price: $12.35 Add to Order Form

INFINITY tines
1DS500805 Click here for more information	INFINITY 1/2" Side-Eject tine. 6" length, 3/4" mount; .390" ID, .550" OD, .072" wall. Length: 6 Mount Size: 0.75 Price: $12.35 Add to Order Form

New Products
1DS500805 Click here for more information	INFINITY 1/2" Side-Eject tine. 6" length, 3/4" mount; .390" ID, .550" OD, .072" wall. Length: 6 Mount Size: 0.75 Price: $12.35 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS500805 Click here for more information	INFINITY 1/2" Side-Eject tine. 6" length, 3/4" mount; .390" ID, .550" OD, .072" wall. Length: 6 Mount Size: 0.75 Price: $12.35 Add to Order Form

Conventional Coring Tines
1DS500805 Click here for more information	INFINITY 1/2" Side-Eject tine. 6" length, 3/4" mount; .390" ID, .550" OD, .072" wall. Length: 6 Mount Size: 0.75 Price: $12.35 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS625101 Click here for more information	Premium 5/8" Coring Tine, side eject 5 1/2" x 3/4" Mount Diameter ID .490" OD .655" Wall .072 Length: 6 Mount Size: 0.75 Price: $5.35 Add to Order Form

New Products
1DS625101 Click here for more information	Premium 5/8" Coring Tine, side eject 5 1/2" x 3/4" Mount Diameter ID .490" OD .655" Wall .072 Length: 6 Mount Size: 0.75 Price: $5.35 Add to Order Form

New Products
1DS625105 Click here for more information	Premium 5/8" Coring Tine, side eject 6" x 3/4" Mount Diameter ID .490" OD .655" Wall .072 Length: 6 Mount Size: 0.75 Price: $5.35 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS625105 Click here for more information	Premium 5/8" Coring Tine, side eject 6" x 3/4" Mount Diameter ID .490" OD .655" Wall .072 Length: 6 Mount Size: 0.75 Price: $5.35 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS625501 Click here for more information	DILLENNIUM® Coring Tine, Side Eject, 5/8" x 5.75" with 3/4" Mounting Diameter ID .485", OD .633" Wall .072" Length: 5.75 Mount Size: 0.75 Price: $13.35 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS625503 Click here for more information	DILLENNIUM® Coring Tine, Side Eject, 5/8" x 4.50" with 3/4" Mounting Diameter ID .485" OD .633" Wall .072" Length: 4.5 Mount Size: 0.75 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS625504 Click here for more information	DILLENNIUM® Coring Tine, Side Eject, 5/8" x 5.0" with 3/4" Mounting Diameter ID .485" OD .633" Wall .072" Length: 5 Mount Size: 0.75 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS625505 Click here for more information	DILLENNIUM® Coring Tine, Side Eject, 5/8" X..6.25" with 3/4" Mounting Diameter ID .485" OD .633" Wall .072" Length: 6.25 Mount Size: 0.75 Price: $13.35 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS625801 Click here for more information	INFINITY 5/8" Side-Eject tine. 5 1/2" length, 3/4" mount; .490" ID, .655" OD, .072" wall. Length: 5.5 Mount Size: 0.75 Price: $12.35 Add to Order Form

Conventional Coring Tines
1DS625801 Click here for more information	INFINITY 5/8" Side-Eject tine. 5 1/2" length, 3/4" mount; .490" ID, .655" OD, .072" wall. Length: 5.5 Mount Size: 0.75 Price: $12.35 Add to Order Form

New Products
1DS625801 Click here for more information	INFINITY 5/8" Side-Eject tine. 5 1/2" length, 3/4" mount; .490" ID, .655" OD, .072" wall. Length: 5.5 Mount Size: 0.75 Price: $12.35 Add to Order Form

INFINITY tines
1DS625801 Click here for more information	INFINITY 5/8" Side-Eject tine. 5 1/2" length, 3/4" mount; .490" ID, .655" OD, .072" wall. Length: 5.5 Mount Size: 0.75 Price: $12.35 Add to Order Form

INFINITY tines
1DS625805 Click here for more information	INFINITY 5/8" Side-Eject tine 6" length, 3/4" mount; .490" ID, .655" OD, .072" wall. Length: 6 Mount Size: 0.75 Price: $12.35 Add to Order Form

New Products
1DS625805 Click here for more information	INFINITY 5/8" Side-Eject tine 6" length, 3/4" mount; .490" ID, .655" OD, .072" wall. Length: 6 Mount Size: 0.75 Price: $12.35 Add to Order Form

Conventional Coring Tines
1DS625805 Click here for more information	INFINITY 5/8" Side-Eject tine 6" length, 3/4" mount; .490" ID, .655" OD, .072" wall. Length: 6 Mount Size: 0.75 Price: $12.35 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS625805 Click here for more information	INFINITY 5/8" Side-Eject tine 6" length, 3/4" mount; .490" ID, .655" OD, .072" wall. Length: 6 Mount Size: 0.75 Price: $12.35 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS750101 Click here for more information	Premium 3/4" Coring Tine, side eject 6" x 7/8" Mount Diameter ID .585" OD .775" Wall .095" Length: 6 Mount Size: 0.875 Price: $5.50 Add to Order Form

New Products
1DS750101 Click here for more information	Premium 3/4" Coring Tine, side eject 6" x 7/8" Mount Diameter ID .585" OD .775" Wall .095" Length: 6 Mount Size: 0.875 Price: $5.50 Add to Order Form

Conventional Coring Tines - Replaces John Deere® Parts
1DS750501 Click here for more information	DILLENNIUM® Coring Tine, Side Eject, 3/4" x 6.25" with 7/8" Mounting Diameter ID .535" OD .745" Wall .095" Length: 6.25 Mount Size: 0.875 Price: $14.30 Add to Order Form

Deep Tines - Coring Deep Tines
1DT100101 Click here for more information	Premium Deep Coring Tine 1" x 8" 18mm mount diameter 9 3/4" total length ID .625" OD 1.00" Wall .120" Length: 0 Mount Size: 0.75 Price: $26.20 Add to Order Form

Deep Tines - Coring Deep Tines
1DT100105 Click here for more information	Premium Deep Coring Tine 1" X 10" with 18mm Mounting Diameter, VERTI-DRAIN. 11 3/4" total length ID .625" OD 1.00" Wall .120" Length: 11.75 Mount Size: 0.75 Price: $28.65 Add to Order Form

Deep Tines - Coring Deep Tines
1DT100107 Click here for more information	Premium Deep Coring Tine 1" x 10" with 18mm Mounting Diameter Soil Reliever. 12" total length ID .625" OD 1.00" Wall .120" Length: 12.5 Mount Size: 0.75 Price: $28.65 Add to Order Form

Deep Tines - Coring Deep Tines
1DT100505 Click here for more information	DILLENNIUM® Deep Coring Tine 1X 10 1/4" w/ 18mm Mounting Diameter for VERTI-DRAIN 12" total length ID .590" OD 1.00" Wall .120" Length: 12 Mount Size: 0.75 Price: $39.75 Add to Order Form

Deep Tines - Coring Deep Tines
1DT100507 Click here for more information	DILLENNIUM® Deep Coring Tine 1" X 10 1/4" w/ 18mm Mounting Diameter for Soil Reliever 12 1/4" total length ID .590" OD 1.00" Wall .120 Length: 12.75 Mount Size: 0.75 Price: $39.75 Add to Order Form

Deep Tines - Coring Deep Tines
1DT112104 Click here for more information	Premium Deep Coring Tine 1 1/8 X 10" w/ 18mm Mounting Diameter for VERTI-DRAIN 11 3/4" total length ID .750" OD 1.125" Wall .120" Length: 11.75 Mount Size: 0.75 Price: $31.70 Add to Order Form

Deep Tines - Coring Deep Tines
1DT112105 Click here for more information	Premium Deep Coring Tine, 1 1/8 X 10" w/ 18mm Mounting Diameter for Soil Reliever 12" total length ID .750" OD 1.125" Wall .120" Length: 12 Mount Size: 0.75 Price: $31.70 Add to Order Form

Deep Tines - Coring Deep Tines
1DT112106 Click here for more information	Premium Deep Coring Tine, 1 1/8" X 10" with 24mm Mounting Diameter 12 1/2" total length ID .750" OD 1.125" Wall .120" Length: 12.25 Mount Size: 1 Price: $31.70 Add to Order Form

Deep Tines - Coring Deep Tines
1DT125102 Click here for more information	Premium Deep Coring Tine, Side Eject, 1 1/4" x 12" with 18mm Mounting Diameter 12" total length ID .812" OD 1.25" Wall .135" Length: 12.25 Mount Size: 0.75 Price: $33.85 Add to Order Form

Deep Tines - Coring Deep Tines
1DT125103 Click here for more information	Premium 1 1/4" Coring Deep Tine, 10" working depth, 24mm Mounting Diameter for SR only. 12" total length ID .812" OD 1.25" Wall .135" Length: 12.25 Mount Size: 1 Price: $34.40 Add to Order Form

Deep Tines - Coring Deep Tines
1DT125104 Click here for more information	Premium Deep Coring Tine for VERTI-DRAIN® 1 1/4" x 12" with 3/4" Mounting Diameter. 14" total length ID .812 OD 1.25" Wall .135 Length: 14.25 Mount Size: 0.75 Price: $36.60 Add to Order Form

Deep Tines - Coring Deep Tines
1DT125105 Click here for more information	Premium Deep CoringTine 1 1/4" X 12" with 24mm Mounting Diameter for VERTI-DRAIN 14" total length ID .812" OD 1.25" Wall .135" Length: 14.25 Mount Size: 1 Price: $36.60 Add to Order Form

Deep Tines - Coring Deep Tines
1DT125504 Click here for more information	1 1/4" DILLENNIUM® Deep Coring Tine 14 1/4" length, 12 1/4" working depth with 18mm mounting diameter for Soil Reliever and VERTIDRAIN. Length: 14.25 Mount Size: 0.75 Price: $42.05 Add to Order Form

Deep Tines - Coring Deep Tines
1DT125505 Click here for more information	DILLENNIUM® 1 1/4" Coring Deep Tine, 14 1/4" Length, 12 1/4" working depth 24mm Mounting Diameter for Verti-Drain only. ID .800 OD 1.25" Wall .135" Length: 14.25 Mount Size: 1 Price: $42.05 Add to Order Form

Deep Tines - Coring Deep Tines
1DT375101 Click here for more information	Premium Deep Coring Tine 3/8 X 5" w/ 5/16" Mounting Diameter for VERTI-DRAIN 6" total length (fixed shank) ID .240" OD .330" Wall .060" Length: 6 Mount Size: 0.313 Price: $6.40 Add to Order Form

Deep Tines - Coring Deep Tines
1DT375501 Click here for more information	DILLENNIUM® Deep Coring Tine 3/8" X 5 1/8" w/ 5/16" Mounting Diameter for VERTI-DRAIN. 6 1/8" total length ID .240" OD.327" Wall .060" Length: 6.125 Mount Size: 0.313 Price: $11.45 Add to Order Form

Deep Tines - Coring Deep Tines
1DT625103 Click here for more information	Premium Deep Coring Tine 5/8 X 7" w/ 12mm Mounting Diameter for VERTI-DRAIN. 8.17" total length ID .400" OD .625" Wall .072" Length: 7 Mount Size: 0.472 Price: $11.85 Add to Order Form

Deep Tines - Coring Deep Tines
1DT625104 Click here for more information	Premium Deep Coring Tine 5/8 x 7" with 12mm Mounting Diameter for Soil Reliever. 9" total length ID .400" OD .625" Wall .072" Length: 9.25 Mount Size: 0.472 Price: $11.85 Add to Order Form

Deep Tines - Coring Deep Tines
1DT625105 Click here for more information	Premium Deep Coring Tine 5/8" x7" with 12mm fixed shank. 8.17" total length ID .400" OD .625" Wall .072" Length: 8.17 Mount Size: 0.472 Price: $10.40 Add to Order Form

Deep Tines - Coring Deep Tines
1DT625106 Click here for more information	Premium Deep Coring Tine 5/8" x 7" with 12mm fixed shank for Soil Reliever. 9" total length ID .400" OD .625" Wall .072" Length: 9 Mount Size: 0.472 Price: $10.40 Add to Order Form

Deep Tines - Coring Deep Tines
1DT625503 Click here for more information	DILLENNIUM® Deep Coring Tine 5/8 X 7 1/4" w/ 12mm Mounting Diameter for VERTI-DRAIN. 8.40" total depth ID .350" OD .625" Wall .072" Length: 8.42 Mount Size: 0.472 Price: $18.05 Add to Order Form

Deep Tines - Coring Deep Tines
1DT625504 Click here for more information	DILLENNIUM® Deep Coring Tine 5/8" x 7 1/4" with 12mm Mounting Diameter for Soil Reliever. 9 1/4" total length ID .350" OD .625" Wall .072" Length: 9.25 Mount Size: 0.472 Price: $18.05 Add to Order Form

Deep Tines - Coring Deep Tines
1DT625505 Click here for more information	DILLENNIUM® Deep Coring Tine 5/8" x 7 1/4" with 12mm fixed shank 8.40" total length ID .350" OD .625" OD .072" Length: 8.4 Mount Size: 0.472 Price: $16.25 Add to Order Form

Deep Tines - Coring Deep Tines
1DT625506 Click here for more information	DILLENNIUM® Deep Coring Tine 5/8" x 7 1/4" with 12mm fixed shank 9 1/4 total length ID .350" OD .625" Wall .072" Length: 9.25 Mount Size: 0.472 Price: $16.25 Add to Order Form

Deep Tines - Coring Deep Tines
1DT750101 Click here for more information	Premium Deep Coring Tine 3/4" x 8" 12mm Mount Diameter 9.30" total length ID .450" OD .750" Wall .095" Length: 9.3 Mount Size: 0.472 Price: $18.60 Add to Order Form

Deep Tines - Coring Deep Tines
1DT750102 Click here for more information	Premium Deep Coring Tine 3/4" x 8" 18mm mount diameter 9.77" total length ID .450" OD .750" Wall .095" Length: 9.77 Mount Size: 0.75 Price: $18.60 Add to Order Form

Deep Tines - Coring Deep Tines
1DT750105 Click here for more information	Premium Deep Coring Tine 3/4" X 10" with 18mm Mounting Diameter for VERTI-DRAIN 11 3/4" total length ID .450" OD .750" Wall .095" Length: 11.75 Mount Size: 0.75 Price: $20.75 Add to Order Form

Deep Tines - Coring Deep Tines
1DT750106 Click here for more information	Premium Deep Coring Tine 3/4" x 10" with 12mm Mounting Diameter for VERTI-DRAIN 11 3/8" total length ID .450" OD .750" Wall .095 Length: 11.375 Mount Size: 0.472 Price: $20.75 Add to Order Form

Deep Tines - Coring Deep Tines
1DT750107 Click here for more information	Premium Deep Coring Tine 3/4" x 10" with 12mm Mounting Diameter for Soil Reliever 12" total length ID .450" OD .750" Wall .095" Length: 12 Mount Size: 0.472 Price: $20.75 Add to Order Form

Deep Tines - Coring Deep Tines
1DT750108 Click here for more information	Premium Deep Coring Tine, 3/4" x 10" with 18mm Mounting Diameter for Soil Reliever 12" total length ID .450" OD .750" Wall .095" Length: 12 Mount Size: 0.75 Price: $20.75 Add to Order Form

Deep Tines - Coring Deep Tines
1DT750505 Click here for more information	DILLENNIUM® Deep Coring Tine 3/4 X 10 1/4" w/ 18mm Mounting Diameter for VERTI-DRAIN 12" total length ID .440" OD .750" Wall.095" Length: 12 Mount Size: 0.75 Price: $31.15 Add to Order Form

Deep Tines - Coring Deep Tines
1DT750506 Click here for more information	DILLENNIUM® Deep Coring Tine 3/4 X 10 1/4" w/ 12mm Mounting Diameter for VERTI-DRAIN 11 1/2" total length ID .450" OD .750" Wall .095" Length: 11.5 Mount Size: 0.472 Price: $31.15 Add to Order Form

Deep Tines - Coring Deep Tines
1DT750507 Click here for more information	DILLENNIUM® Deep Coring Tine 3/4 x 10" with 12mm Mounting Diameter for Soil Reliever 12 1/4" total length ID .440" OD .750" Wall .095 Length: 12.25 Mount Size: 0.472 Price: $31.15 Add to Order Form

Deep Tines - Coring Deep Tines
1DT750508 Click here for more information	DILLENNIUM® Deep Coring Tine 3/4" X 10" with 18mm Mounting Diameter for Soil Reliever 12 1/4" total length ID .440" OD .750" Wall .095" Length: 12.25 Mount Size: 0.75 Price: $31.15 Add to Order Form

Deep Tines - Coring Deep Tines
1DT812102 Click here for more information	Premium Deep Coring Tine 13/16" X 10" w/ 18mm Mounting Diameter for VERTI-DRAIN 11 3/4" total length ID .510" OD .812" Wall .105" Length: 11.75 Mount Size: 0.75 Price: $22.95 Add to Order Form

Deep Tines - Coring Deep Tines
1DT812103 Click here for more information	Premium Deep Coring Tine 13/16 X 10" w/ 12 Mounting Diameter for VERTI-DRAIN 11 3/8" total length ID .510" OD .812" Wall .105" Length: 11.375 Mount Size: 0.5 Price: $22.95 Add to Order Form

Deep Tines - Coring Deep Tines
1DT812104 Click here for more information	Premium Deep Coring Tine 13/16" X 10" with 12mm Mounting Diameter for Soil Reliever 12" total length ID .510" OD .812" Wall .105" Length: 12 Mount Size: 0.472 Price: $22.95 Add to Order Form

Deep Tines - Coring Deep Tines
1DT812105 Click here for more information	Premium Deep Coring Tine 13/16 X 12" w/ 18mm Mounting Diameter for VERTI-DRAIN 13 3/8" total length ID .510" OD .812" Wall .105" Length: 13.375 Mount Size: 0.472 Price: $26.45 Add to Order Form

Deep Tines - Coring Deep Tines
1DT812106 Click here for more information	Premium Deep Coring Tine 13/16" x 10" with 18mm Mounting Diameter for Soil Reliever 12" total length ID .510" OD .812" Wall .105" Length: 12 Mount Size: 0.75 Price: $22.95 Add to Order Form

Deep Tines - Coring Deep Tines
1DT812107 Click here for more information	Premium Deep Coring Tine 13/16" X 12" with 12mm Mounting Diameter for Soil Reliever 14" total length ID .510" OD .812" Wall .105" Length: 14 Mount Size: 0.472 Price: $26.45 Add to Order Form

Deep Tines - Coring Deep Tines
1DT812108 Click here for more information	Premium Deep Coring Tine 13/16 X 12" w/ 18mm Mounting Diameter for VERTI-DRAIN 13 3/4" total length ID .510" OD .812" Wall .105" Length: 13.75 Mount Size: 0.75 Price: $26.45 Add to Order Form

Deep Tines - Coring Deep Tines
1DT812109 Click here for more information	Premium Deep Coring Tine 13/16" X 12" with 18mm Mounting Diameter for Soil Reliever 14" total length ID .510" OD .812" Wall .105" Length: 14 Mount Size: 0.75 Price: $26.45 Add to Order Form

Deep Tines - Coring Deep Tines
1DT812110 Click here for more information	Premium Deep Coring Tine 13/16" X 8" w/ 18mm Mounting Diameter for VERTI-DRAIN 10.02" total length ID .510" OD .812" Wall .105" Length: 0 Mount Size: 0 Price: $20.55 Add to Order Form

Deep Tines
1DT812110 Click here for more information	Premium Deep Coring Tine 13/16" X 8" w/ 18mm Mounting Diameter for VERTI-DRAIN 10.02" total length ID .510" OD .812" Wall .105" Length: 0 Mount Size: 0 Price: $20.55 Add to Order Form

New Products
1DT812110 Click here for more information	Premium Deep Coring Tine 13/16" X 8" w/ 18mm Mounting Diameter for VERTI-DRAIN 10.02" total length ID .510" OD .812" Wall .105" Length: 0 Mount Size: 0 Price: $20.55 Add to Order Form

New Products
1DT812111 Click here for more information	Premium Deep Coring Tine 13/16" X 8" w/ 12mm Mounting Diameter for VERTI-DRAIN 9.3" total length ID .510" OD .812" Wall .105" Length: 0 Mount Size: 0.472 Price: $20.55 Add to Order Form

Deep Tines
1DT812111 Click here for more information	Premium Deep Coring Tine 13/16" X 8" w/ 12mm Mounting Diameter for VERTI-DRAIN 9.3" total length ID .510" OD .812" Wall .105" Length: 0 Mount Size: 0.472 Price: $20.55 Add to Order Form

Deep Tines - Coring Deep Tines
1DT812111 Click here for more information	Premium Deep Coring Tine 13/16" X 8" w/ 12mm Mounting Diameter for VERTI-DRAIN 9.3" total length ID .510" OD .812" Wall .105" Length: 0 Mount Size: 0.472 Price: $20.55 Add to Order Form

Deep Tines - Coring Deep Tines
1DT812502 Click here for more information	Dillennium Deep Coring Tine 13/16 X 10 1/4" w/ 18mm Mounting Diameter for VERTI-DRAIN 11 3/4" total length ID .490" OD .812" Wall .105" Length: 11.75 Mount Size: 0.75 Price: $32.25 Add to Order Form

Deep Tines - Coring Deep Tines
1DT812503 Click here for more information	DILLENNIUM® Deep Coring Tine 13/16 X 10 1/4" w/ 12mm Mounting Diameter for VERTI-DRAIN 11 1/2" total length ID .490" OD 812" Wall .105" Length: 11.5 Mount Size: 0.472 Price: $32.25 Add to Order Form

Deep Tines - Coring Deep Tines
1DT812504 Click here for more information	DILLENNIUM® Deep Coring Tine 13/16 X 10 1/4" w/ 12mm Mounting Diameter for Soil Reliever 12 1/4" total length ID .510" OD .812 Wall .105" Length: 12.25 Mount Size: 0.472 Price: $32.25 Add to Order Form

Deep Tines - Coring Deep Tines
1DT812505 Click here for more information	DILLENNIUM® Deep Coring Tine 13/16 X 12 1/4" w/ 12mm Mounting Diameter for VERTI-DRAIN 13 1/2" total length ID .490" OD .812" Wall .105" Length: 13.5 Mount Size: 0.472 Price: $35.90 Add to Order Form

Deep Tines - Coring Deep Tines
1DT812506 Click here for more information	DILLENNIUM® Deep Coring Tine 13/16 X 10 1/4" w/ 18mm Mounting Diameter for Soil Reliever 12 1/4" total length ID .490" OD .812" Wall .105" Length: 12.25 Mount Size: 0.75 Price: $32.25 Add to Order Form

Deep Tines - Coring Deep Tines
1DT812507 Click here for more information	DILLENNIUM® Deep Coring Tine 13/16 X 12 1/4" w/ 12mm Mounting Diameter for Soil Reliever 14 1/2" total length ID .490" OD .812" Wall .105" Length: 14.5 Mount Size: 0.472 Price: $35.50 Add to Order Form

Deep Tines - Coring Deep Tines
1DT812508 Click here for more information	DILLENNIUM® Deep Coring Tine 13/16" X 12 1/4" with 18mm Mounting Diameter for VERTI-DRAIN 14" total length ID .490" OD .812" Wall .105" Length: 14 Mount Size: 0.75 Price: $35.90 Add to Order Form

Deep Tines - Coring Deep Tines
1DT812509 Click here for more information	DILLENNIUM® Deep Coring Tine 13/16" X 12 1/4" with 18mm Mounting Diameter for Soil Reliever 14 1/4" total length ID .490" OD .812" Wall .105" Length: 14.25 Mount Size: 0.75 Price: $35.90 Add to Order Form

Deep Tines - Coring Deep Tines
1DT812510 Click here for more information	DILLENNIUM Deep Coring Tine 13/16" X 8 1/4" w/ 18mm Mounting Diameter for VERTI-DRAIN 10.02" total length ID .490" OD .812" Wall .105" Length: 8.25 Mount Size: 0 Price: $29.85 Add to Order Form

Deep Tines
1DT812510 Click here for more information	DILLENNIUM Deep Coring Tine 13/16" X 8 1/4" w/ 18mm Mounting Diameter for VERTI-DRAIN 10.02" total length ID .490" OD .812" Wall .105" Length: 8.25 Mount Size: 0 Price: $29.85 Add to Order Form

New Products
1DT812510 Click here for more information	DILLENNIUM Deep Coring Tine 13/16" X 8 1/4" w/ 18mm Mounting Diameter for VERTI-DRAIN 10.02" total length ID .490" OD .812" Wall .105" Length: 8.25 Mount Size: 0 Price: $29.85 Add to Order Form

New Products
1DT812511 Click here for more information	DILLENNIUM Deep Coring Tine 13/16" X 8 1/4" w/ 12mm Mounting Diameter for VERTI-DRAIN 9.55" total length ID .490" OD .812" Wall .105" Length: 8.25 Mount Size: 0.472 Price: $29.85 Add to Order Form

Deep Tines
1DT812511 Click here for more information	DILLENNIUM Deep Coring Tine 13/16" X 8 1/4" w/ 12mm Mounting Diameter for VERTI-DRAIN 9.55" total length ID .490" OD .812" Wall .105" Length: 8.25 Mount Size: 0.472 Price: $29.85 Add to Order Form

Deep Tines - Coring Deep Tines
1DT812511 Click here for more information	DILLENNIUM Deep Coring Tine 13/16" X 8 1/4" w/ 12mm Mounting Diameter for VERTI-DRAIN 9.55" total length ID .490" OD .812" Wall .105" Length: 8.25 Mount Size: 0.472 Price: $29.85 Add to Order Form

Economy Tines
1E375101 Click here for more information	Economy coring tine 3/8" x 4.5" with 3/4" mounting diameter. ID .350" OD .625" Wall .055" Length: 4.5 Mount Size: 0.75 Price: $2.75 Add to Order Form

Economy Tines
1E375102 Click here for more information	Economy coring tine 3/8" x 5" with 3/4" mounting diameter. ID .350" OD .625" Wall .055" Length: 5 Mount Size: 0.75 Price: $2.90 Add to Order Form

Economy Tines
1E500101 Click here for more information	Economy coring tine 1/2" x 4.5" with 3/4" mounting diameter. ID .445" OD .750" Wall .055" Length: 4.5 Mount Size: 0.75 Price: $2.55 Add to Order Form

Economy Tines
1E500102 Click here for more information	Economy coring tine 1/2" x 5" with 3/4" mounting diameter. ID .445" OD .750" Wall .055" Length: 5 Mount Size: 0.75 Price: $2.66 Add to Order Form

Economy Tines
1E500104 Click here for more information	Economy coring tine 1/2" x 6" with 3/4" mounting diameter. ID .445" OD .750" Wall .055" Length: 6 Mount Size: 0.75 Price: $2.80 Add to Order Form

Economy Tines
1E625101 Click here for more information	Economy coring tine 5/8" x 4.5" with 3/4" mounting diameter. ID .545" OD .750" Wall .055" Length: 4.5 Mount Size: 0.75 Price: $2.55 Add to Order Form

Economy Tines
1E625102 Click here for more information	Economy coring tine 5/8" x 5" with 3/4" mounting diameter. ID .545" OD .750" Wall .055" Length: 5 Mount Size: 0.75 Price: $2.65 Add to Order Form

Economy Tines
1E625104 Click here for more information	Economy coring tine 5/8" x 6" with 3/4" mounting diameter. Length: 6 Mount Size: 0.75 Price: $2.85 Add to Order Form

Economy Tines
1E750102 Click here for more information	Economy coring tine 3/4" x 5" with 7/8" mounting diameter. ID .635" OD .875" Wall .070" Length: 5 Mount Size: 0.875 Price: $3.50 Add to Order Form

Economy Tines
1E750103 Click here for more information	Economy coring tine 3/4" x 6 1/4" with 7/8" mounting diameter. ID .635" OD .875" Wall .070" Length: 6.25 Mount Size: 0.875 Price: $3.80 Add to Order Form

Economy Tines
1ES875102 Click here for more information	Economy side-eject rolled tine .875" x 5.5" with 7/8" mounting diameter. ID .610" OD .875" Wall .134" Length: 5.5 Mount Size: 0.875 Price: $3.55 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS100101 Click here for more information	Premium Fairway Coring Tine, Side Eject, 1" X 6" with 3/4" Mounting Diameter 6 3/4" total length ID .595" OD .840" Wall .120" Length: 6.75 Mount Size: 0.75 Price: $15.75 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS100102 Click here for more information	Premium Fairway Coring Tine, Side Eject, 1" X 6" with 7/8" Mounting Diameter 6 3/4" total length ID .595" OD .860" Wall .120" Length: 6.75 Mount Size: 0.875 Price: $15.75 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS100103 Click here for more information	Premium Fairway Coring Tine, Side Eject, 1" X 6" with 12mm Mounting Diameter for VD, 7.33" total length ID .595" OD .860" Wall .120" Length: 7.33 Mount Size: 0.472 Price: $17.50 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS100104 Click here for more information	Premium Fairway Coring Tine, Side Eject, 1" X 6" 8.25" total length with 12mm Mounting Diameter for SR ID .595" OD .860" Wall .120" Length: 8.25 Mount Size: 0.472 Price: $17.50 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS100105 Click here for more information	Premium Fairway Coring Tine Side Eject, 1" X 6", 7.170" total length with 12mm Mounting Diameter for Mustang ID .595" OD .860" Wall .120" Length: 7.17 Mount Size: 0.472 Price: $17.50 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS100106 Click here for more information	Premium Fairway Coring, Tine Side Eject, 1" X 6", 7.770" total length with 18mm Mounting Diameter for VD ID .595" OD .860" Wall .120" Length: 7.77 Mount Size: 0.742 Price: $17.50 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS100107 Click here for more information	Premium Fairway Coring, Tine Side Eject, 1" X 6", 8.250" total length with 18mm Mounting Diameter for SR Length: 8.25 Mount Size: 0.742 Price: $17.50 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS100501 Click here for more information	DILLENNIUM® Fairway Coring Tine, Side Eject, 1" x 6" 6 3/4" total length with 3/4" Mounting Diameter ID .590" OD .840" Wall .120" Length: 6.75 Mount Size: 0.75 Price: $25.15 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS100502 Click here for more information	DILLENNIUM® Fairway Coring Tine, Side Eject, 1" X 6" 6 3/4" total length with 7/8" Mounting Diameter ID .590" OD .840" Wall .120" Length: 6.75 Mount Size: 0.875 Price: $25.15 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS100503 Click here for more information	DILLENNIUM® Fairway Coring Tine, Side Eject, 1" X 6" 7.330 total length with 12mm Mounting Diameter for VD ID .590" OD .860" Wall .120" Length: 7.33 Mount Size: 0.472 Price: $26.20 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS100504 Click here for more information	DILLENNIUM® Fairway Coring Tine, Side Eject, 1" X 6" 8.250" total length with 12mm Mounting Diameter for SR ID .590" OD .840" Wall .120" Length: 8.25 Mount Size: 0.472 Price: $26.20 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS100505 Click here for more information	DILLENNIUM® Fairway Coring Tine, Side Eject, 1" X 6" 7.170" total length with 12mm Mounting Diameter for Mustang Length: 7.17 Mount Size: 0.472 Price: $26.20 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS100506 Click here for more information	DILLENNIUM® Fairway Coring Tine, Side Eject, 1" X 6" 7.770" total length with 18mm Mounting Diameter for VD Length: 7.77 Mount Size: 0.472 Price: $26.20 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS100507 Click here for more information	Dillennium Fairway Coring Tine, Side Eject, 1" X 6" 8.250" total length with 18mm Mounting Diameter, for SR Length: 8.25 Mount Size: 0.472 Price: $26.20 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS112101 Click here for more information	Premium Fairway Coring Tine 1 1/8" x 6" 6.75" total length with 3/4" mounting diameter ID .735" OD 1.005" Wall .135" Length: 6.75 Mount Size: 0.75 Price: $17.20 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS112102 Click here for more information	Premium Fairway Coring Tine 1 1/8" x 6" 6.75" total length with 7/8" mounting diameter ID .735" OD 1.005" Wall .135" Length: 6.75 Mount Size: 0.875 Price: $17.20 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS125101 Click here for more information	Premium Fairway Coring Tine, Side Eject, 1 1/4" x 6" 6 3/4" total length with 3/4" Mounting Diameter ID .800" OD 1.140" Wall .135" Length: 6.75 Mount Size: 0.75 Price: $19.80 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS125102 Click here for more information	Premium Fairway Coring Tine, Side Eject 1 1/4" x 6" 6 3/4" total length with 7/8" Mounting Diameter ID .800" OD 1.140" Wall .135" Length: 6.75 Mount Size: 0.875 Price: $19.80 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS125104 Click here for more information	Premium 1 1/4" Fairway Coring Tine, 7" 7.75" total length 7/8" Mounting Diameter ID .830" OD 1.100" Wall .135" Length: 7.75 Mount Size: 0.875 Price: $21.75 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS125106 Click here for more information	Premium Fairway Coring Tine, Side Eject, 1 1/4" X 6" working depth 7.770" total length with 18MM Mounting Diameter for VD Length: 7.77 Mount Size: 0.75 Price: $19.15 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS125107 Click here for more information	Premium Fairway Coring Tine, Side Eject, 1 1/4" X 6" working depth 8.250" total length with 18mm Mounting Diameter for SR Length: 8.25 Mount Size: 0.75 Price: $19.15 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS125108 Click here for more information	Premium 1 1/4" Fairway Coring Tine, 7" working depth 8.77" Total Length, 18mm Mounting Diameter for VD ID .830" OD 1.100" Wall .135" Length: 8.77 Mount Size: 0.742 Price: $22.80 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS125109 Click here for more information	Premium 1 1/4" Fairway Coring Tine, 7" working depth, 9.50" Total Length, 24mm Mounting Diameter for SR ID .830" OD 1.100" Wall .135" Length: 9.5 Mount Size: 0 Price: $22.80 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS125501 Click here for more information	DILLENNIUM® 1 1/4" Fairway Tine, 6" working depth 6.75" total length 3/4" Mounting Diameter. ID .800" OD 1.083" Wall .135" Length: 6.75 Mount Size: 0.75 Price: $26.80 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS125502 Click here for more information	DILLENNIUM® 1 1/4" Fairway Coring Tine 6" working depth, 6 3/4" total length with 7/8 " Mounting Diameter. ID .800" OD 1.083" Wall .135" Length: 6.75 Mount Size: 0.875 Price: $26.80 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS125506 Click here for more information	DILLENNIUM® 1 1/4" Fairway Coring Tine, 6" working depth 7.77" total length, 18mm Mounting Diameter for VD ID .800" OD 1.083" Wall .135" Length: 7.77 Mount Size: 0.742 Price: $27.30 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS125507 Click here for more information	DILLENNIUM® 1 1/4" Fairway Coring Tine, 6" working depth, 8.25" total length, 18mm Mounting Diameter for SR ID .800" OD 1.083" Wall .135" Length: 8.25 Mount Size: 0.742 Price: $27.30 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS625101 Click here for more information	Premium Fairway Coring Tine 5/8" X 6" 7.19" total depth with 12mm mount for Mustang ID .400" OD .545" Wall .072" Length: 7.19 Mount Size: 0.472 Price: $12.25 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS625102 Click here for more information	Premium Fairway Coring Tine 5/8" x 6" working depth 7.17" total length with 12mm fixed shank mounting diameter for Mustang ID .390" OD .625" Wall .072" Length: 7.17 Mount Size: 0.472 Price: $10.50 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS625103 Click here for more information	Premium Fairway Coring Tine 5/8" x 6.97" working depth 8" total length with 12mm fixed mount ID .406" OD .550" Wall .072" Length: 6.97 Mount Size: 0.472 Price: $10.40 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS625501 Click here for more information	DILLENNIUM® Fairway Coring Tine 5/8" X 6" 7.44" total length with 12mm Mounting Diameter for Mustang ID .350" OD .525" Wall .072 Length: 7.44 Mount Size: 0.472 Price: $18.35 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS625502 Click here for more information	DILLENNIUM® Fairway Coring Tine 5/8" x 6" 7.42" total length with 12mm fixed mount for Mustang ID .340" OD .625" Wall .072" Length: 7.42 Mount Size: 0.472 Price: $16.95 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS625503 Click here for more information	DILLENNIUM® Fairway Coring Tines 5/8" x 7.20" 8.25" total length with 12mm fixed mount Length: 8.25 Mount Size: 0.472 Price: $16.25 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS750502 Click here for more information	DILLENNIUM® Fairway Coring Tine 3/4" x 5 3/4" working depth, 6.92" total length with 12mm fixed mount for Mustang ID .440" OD .630" Wall .072" Length: 6.92 Mount Size: 0.472 Price: $16.95 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS812101 Click here for more information	Premium Fairway Coring Tine, Side Eject 13/16" X 6" 6 3/4" total length with 3/4" Mounting Diameter ID .500 OD .720" Wall .105" Length: 6.75 Mount Size: 0.75 Price: $13.45 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS812102 Click here for more information	Premium Fairway Coring Tine, Side Eject, 13/16" X 6" 6 3/4 " total length with 7/8" Mounting Diameter ID .490" OD .720" Wall .105" Length: 6.75 Mount Size: 0.875 Price: $13.45 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS812103 Click here for more information	Premium Fairway Coring Tine, Side Eject 13/16" X 6" 7.330 " total length with 12mm Mounting Diameter for VD ID .500" OD .720" Wall .105" Length: 7.33 Mount Size: 0.472 Price: $14.60 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS812104 Click here for more information	Premium Fairway Coring Tine, Side Eject, 13/16" X 6" 8.250" total length with 12mm Mounting Diameter for SR ID .500 OD .720 Wall .105" Length: 8.25 Mount Size: 0.472 Price: $14.60 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS812105 Click here for more information	Premium Fairway Coring Tine, Side Eject, 13/16" X 6" 7.170" total length with 12mm Mounting Diameter for Mustang ID .500" OD .720" Wall .105" Length: 7.17 Mount Size: 0.472 Price: $14.60 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS812106 Click here for more information	Premium Fairway Coring Tine, Side Eject, 13/16" x 6" 7.770" total length with 18mm Mounting Diameter for VD ID .500" OD .720" Wall .105" Length: 7.77 Mount Size: 0.742 Price: $14.60 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS812107 Click here for more information	Premium Fairway Coring Tine, Side Eject, 13/16" X 6" 8.250" with 18mm Mounting Diameter for SR ID .490" OD .720" Wall .105" Length: 8.25 Mount Size: 0.742 Price: $14.60 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS812501 Click here for more information	DILLENNIUM® Fairway Coring Tine, Side Eject, 13/16" X 6" 6 3/4" total length with 3/4" Mounting Diameter ID .490" OD .720" Wall .105" Length: 6.75 Mount Size: 0.75 Price: $23.95 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS812502 Click here for more information	DILLENNIUM® Fairway Coring Tine, Side Eject, 13/16" X 6" 6 3/4" total length with 7/8" Mounting Diameter ID .490" OD .720" Wall .105" Length: 6.75 Mount Size: 0.875 Price: $23.95 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS812503 Click here for more information	DILLENNIUM® Fairway Coring Tine, Side Eject, 13/16" X 6" 7.330" total length with 12mm Mounting Diameter for VD ID .490" OD .720" Wall .105" Length: 7.33 Mount Size: 0.472 Price: $25.15 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS812504 Click here for more information	DILLENNIUM® Fairway Coring Tine, Side Eject, 13/16" X 6" 8.250" total length with 12mm Mounting Diameter for SR ID .490" OD .720" Wall .105" Length: 8.25 Mount Size: 0.472 Price: $25.15 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS812505 Click here for more information	DILLENNIUM® Fairway Coring Tine, Side Eject, 13/16" X 6" 7.170" total length with 12mm Mounting Diameter for Mustang ID .490" OD .720" Wall .105" Length: 7.17 Mount Size: 0.472 Price: $25.15 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS812506 Click here for more information	DILLENNIUM® Fairway Coring Tine, Side Eject, 13/16" X 6" 7.770" total length with 18mm Mounting Diameter for VD ID .490" OD .720" Wall .105" Length: 7.77 Mount Size: 0 Price: $25.15 Add to Order Form

Conventional Fairway Tines - Fairway Side Eject
1FS812507 Click here for more information	DILLENNIUM® Fairway Coring Tine, Side Eject, 13/16" X 6" 8.250" total length with 18mm Mounting Diameter for SR ID .490" OD .720" Wall .105" Length: 8.25 Mount Size: 0.742 Price: $25.15 Add to Order Form

Conventional Coring Tines - Replaces Jacobsen® Parts
1J500501 Click here for more information	DILLENNIUM® Coring Tine, Side Eject, 1/2" X 6 1/4" with 5/8" Mounting Diameter ID .350" OD .525" Wall .072" Length: 6.25 Mount Size: 0.625 Price: $15.05 Add to Order Form

Conventional Coring Tines - Replaces Jacobsen® Parts
1J625501 Click here for more information	DILLENNIUM® Coring Tine, Side Eject, 1/2" X 6" with 5/8" Mounting Diameter ID .480" OD .633" Wall .072" Length: 6.25 Mount Size: 0.625 Price: $18.30 Add to Order Form

Closed Spoon Tines
1N100103 Click here for more information	JRM Closed Spoon Tine, 1" x 8.5" split, two bolt mount Length: 8.5 Mount Size: 0 Price: $4.59 Add to Order Form

Closed Spoon Tines
1N750102 Click here for more information	JRM Closed Spoon Tine, 3/4" x 7.5" split, one hole mount Length: 7.5 Mount Size: 0 Price: $4.59 Add to Order Form

Quad Tines - Standard Quad Tines
1Q250101 Click here for more information	Premium Quad Coring Tine, Side Eject, 1/4" X 3 1/2" with 3/8" Mounting Diameter ID .240" OD .330" Wall .065" Length: 3.5 Mount Size: 0.375 Price: $4.95 Add to Order Form

Quad Tines - Standard Quad Tines
1Q250102 Click here for more information	Premium Quad Coring Tine, Side Eject, 1/4" X 4" with 1/2" Mounting Diameter ID .240" OD .330" Wall .065" Length: 4 Mount Size: 0.5 Price: $5.20 Add to Order Form

Quad Tines - Standard Quad Tines
1Q250103 Click here for more information	Premium Quad Coring Tine side eject 1/4" x 5" Length with 3/8" Mounting Diameter ID .240" OD .330" Wall .065" Length: 5 Mount Size: 0.375 Price: $6.00 Add to Order Form

Quad Tines - Standard Quad Tines
1Q250104 Click here for more information	Premium Quad Coring Tine side eject 1/4" x 4.2" Length 5/16" Mounting Diameter ID .240" OD .330" Wall .065" Length: 4.2 Mount Size: 0.312 Price: $5.20 Add to Order Form

Quad Tines - Standard Quad Tines
1Q250105 Click here for more information	Premium Quad Tine, side eject, 1/4" x 4.50" with 3/8" Mount Diameter ID .240" OD .330" Wall .065" Length: 4.5 Mount Size: 0.375 Price: $5.75 Add to Order Form

New Products
1Q250105 Click here for more information	Premium Quad Tine, side eject, 1/4" x 4.50" with 3/8" Mount Diameter ID .240" OD .330" Wall .065" Length: 4.5 Mount Size: 0.375 Price: $5.75 Add to Order Form

New Products
1Q250106 Click here for more information	Premium Quad Tine, side eject, 1/4" x 4.50" with 1/2" Mount Diameter ID .240" OD .330" Wall .065" Length: 4.5 Mount Size: 0.5 Price: $5.75 Add to Order Form

Quad Tines - Standard Quad Tines
1Q250106 Click here for more information	Premium Quad Tine, side eject, 1/4" x 4.50" with 1/2" Mount Diameter ID .240" OD .330" Wall .065" Length: 4.5 Mount Size: 0.5 Price: $5.75 Add to Order Form

Quad Tines
1Q250106 Click here for more information	Premium Quad Tine, side eject, 1/4" x 4.50" with 1/2" Mount Diameter ID .240" OD .330" Wall .065" Length: 4.5 Mount Size: 0.5 Price: $5.75 Add to Order Form

Quad Tines
1Q250107 Click here for more information	Premium 1/4" Quad Tine; Length: 4"; Mount Dia.: 5/8"; ID .240"; Tapered OD .330" Length: 4 Mount Size: 0.625 Price: $5.20 Add to Order Form

Quad Tines - Standard Quad Tines
1Q250107 Click here for more information	Premium 1/4" Quad Tine; Length: 4"; Mount Dia.: 5/8"; ID .240"; Tapered OD .330" Length: 4 Mount Size: 0.625 Price: $5.20 Add to Order Form

Quad Tines - Standard Quad Tines
1Q250501 Click here for more information	DILLENNIUM® Quad Coring Tine, Side Eject, 1/4" X 3 5/8" with 3/8" Mounting Diameter ID .240" OD .327" Wall .065" Length: 3.625 Mount Size: 0.375 Price: $9.85 Add to Order Form

Quad Tines - Standard Quad Tines
1Q250502 Click here for more information	DILLENNIUM® Quad Coring Tine, Side Eject, 1/4" X 4.125" with 1/2" Mounting Diameter ID .240" OD .327" Wall .065" Length: 4.125 Mount Size: 0.5 Price: $10.95 Add to Order Form

Quad Tines - Standard Quad Tines
1Q250503 Click here for more information	DILLENNIUM® Premium Quad Coring Tine 1/4" x 5.125" Length 3/8" Mounting Diameter ID .240" OD .327" Wall .065" Length: 5.125 Mount Size: 0.375 Price: $11.50 Add to Order Form

Quad Tines - Standard Quad Tines
1Q250504 Click here for more information	DILLENNIUM® Quad Coring Tine 1/4" x 4.325" Length 5/16" Mounting Diameter ID .240" OD .327" Wall .065" Length: 4.325 Mount Size: 0.312 Price: $10.95 Add to Order Form

Quad Tines - Standard Quad Tines
1Q250505 Click here for more information	DILLENNIUM® Quad Tine, side eject, 1/4" x 4.625" with 3/8" Mount Diameter ID .240" OD .327" Wall .065" Length: 4.625 Mount Size: 0.375 Price: $10.95 Add to Order Form

New Products
1Q250505 Click here for more information	DILLENNIUM® Quad Tine, side eject, 1/4" x 4.625" with 3/8" Mount Diameter ID .240" OD .327" Wall .065" Length: 4.625 Mount Size: 0.375 Price: $10.95 Add to Order Form

New Products
1Q250506 Click here for more information	DILLENNIUM® Quad Tine, side eject, 1/4" x 4.625" with 1/2" Mount Diameter ID .240" OD .327" Wall .065" Length: 4.625 Mount Size: 0.5 Price: $10.95 Add to Order Form

Quad Tines - Standard Quad Tines
1Q250506 Click here for more information	DILLENNIUM® Quad Tine, side eject, 1/4" x 4.625" with 1/2" Mount Diameter ID .240" OD .327" Wall .065" Length: 4.625 Mount Size: 0.5 Price: $10.95 Add to Order Form

Quad Tines
1Q250506 Click here for more information	DILLENNIUM® Quad Tine, side eject, 1/4" x 4.625" with 1/2" Mount Diameter ID .240" OD .327" Wall .065" Length: 4.625 Mount Size: 0.5 Price: $10.95 Add to Order Form

Quad Tines
1Q250507 Click here for more information	Premium 1/4" Quad Tine; Length: 4"; Mount Dia.: 5/8"; ID .240"; Tapered OD .330" Length: 4.125 Mount Size: 0.625 Price: $10.95 Add to Order Form

Quad Tines - Standard Quad Tines
1Q250507 Click here for more information	Premium 1/4" Quad Tine; Length: 4"; Mount Dia.: 5/8"; ID .240"; Tapered OD .330" Length: 4.125 Mount Size: 0.625 Price: $10.95 Add to Order Form

Quad Tines - Standard Quad Tines
1Q250803 Click here for more information	INFINITY 1/4" side-eject Quad tine. 5" length, 3/8" mount; .240" ID, .330" OD, .065" wall Length: 5 Mount Size: 0.375 Price: $10.50 Add to Order Form

Quad Tines
1Q250803 Click here for more information	INFINITY 1/4" side-eject Quad tine. 5" length, 3/8" mount; .240" ID, .330" OD, .065" wall Length: 5 Mount Size: 0.375 Price: $10.50 Add to Order Form

New Products
1Q250803 Click here for more information	INFINITY 1/4" side-eject Quad tine. 5" length, 3/8" mount; .240" ID, .330" OD, .065" wall Length: 5 Mount Size: 0.375 Price: $10.50 Add to Order Form

INFINITY tines
1Q250803 Click here for more information	INFINITY 1/4" side-eject Quad tine. 5" length, 3/8" mount; .240" ID, .330" OD, .065" wall Length: 5 Mount Size: 0.375 Price: $10.50 Add to Order Form

Quad Tines - Super Quad™ Tines
1Q375100 Click here for more information	Premium SuperQuad™ Tine side eject 3/8" x 3.50" with 3/8" Mounting Diameter ID .335" OD .460" Wall .072" Length: 3.5 Mount Size: 0.375 Price: $6.30 Add to Order Form

Quad Tines - Super Quad™ Tines
1Q375101 Click here for more information	Premium SuperQuad™ Coring Tine, Side Eject, 3/8" x 3 1/2" Long with 1/2" Mounting Diameter ID .335" OD .460" Wall .072" Length: 3.5 Mount Size: 0.5 Price: $6.30 Add to Order Form

Quad Tines - Super Quad™ Tines
1Q375102 Click here for more information	Premium SuperQuad™ Coring Tine, Side Eject, 3/8" x 4 1/2" Long with 1/2" Mounting Diameter ID .335" OD .460" Wall .072" Length: 4.5 Mount Size: 0.5 Price: $7.40 Add to Order Form

Quad Tines - Super Quad™ Tines
1Q375103 Click here for more information	Premium SuperQuad™ Coring Tine, Side Eject, 3/8" x 4 1/2" long with 5/8" Mounting Diameter ID .335" OD .460" Wall .072" Length: 4.5 Mount Size: 0.625 Price: $7.40 Add to Order Form

Quad Tines - Super Quad™ Tines
1Q375104 Click here for more information	Premium SuperQuad™ Coring Tine, Side Eject, 3/8" x 4 1/2" Long with 3/4" Mounting Diameter ID .335" OD .460" Wall .072" Length: 4.5 Mount Size: 0.75 Price: $7.40 Add to Order Form

Quad Tines - Super Quad™ Tines
1Q375105 Click here for more information	Premium SuperQuad™ Coring Tine, side eject, 3/8" x 4.50" with 3/8" Mounting Diameter ID .335" OD .460" Wall .072" Length: 4.5 Mount Size: 0.375 Price: $7.40 Add to Order Form

Quad Tines - Super Quad™ Tines
1Q375106 Click here for more information	Premium SuperQuad™ Coring Tine,Side Eject, 3/8" x 4.625" long with 12mm Mounting Diameter ID .335" OD .460" Wall .072" Length: 4.625 Mount Size: 0.472 Price: $7.40 Add to Order Form

Quad Tines - Super Quad™ Tines
1Q375111 Click here for more information	Premium SuperQuad™ Tine side eject 3/8" x 5" with 3/8" Mount Diameter ID .335" OD .460" Wall .072" Length: 5 Mount Size: 0.375 Price: $7.65 Add to Order Form

New Products
1Q375111 Click here for more information	Premium SuperQuad™ Tine side eject 3/8" x 5" with 3/8" Mount Diameter ID .335" OD .460" Wall .072" Length: 5 Mount Size: 0.375 Price: $7.65 Add to Order Form

Quad Tines - Super Quad™ Tines
1Q375500 Click here for more information	DILLENNIUM® SuperQuad™ Coring Tine side eject 3/8" x 3.625" Length 3/8" Mounting Diameter ID .320" OD .400" Wall .072" Length: 3.625 Mount Size: 0.375 Price: $10.40 Add to Order Form

Quad Tines - Super Quad™ Tines
1Q375501 Click here for more information	DILLENNIUM® SuperQuad™ Tine, Side Eject, 3/8" x 3 5/8" Long with 1/2" Mounting Diameter ID .320" OD .400" Wall .072" Length: 3.625 Mount Size: 0.5 Price: $10.40 Add to Order Form

Quad Tines - Super Quad™ Tines
1Q375502 Click here for more information	DILLENNIUM® SuperQuad™ Coring Tine, Side Eject, 3/8" x 4 5/8" Long with 1/2" Mounting Diameter ID .320" OD .400" Wall .072" Length: 4.625 Mount Size: 0.5 Price: $11.50 Add to Order Form

Quad Tines - Super Quad™ Tines
1Q375503 Click here for more information	DILLENNIUM® SuperQuad™ Coring Tine, Side Eject, 3/8" x 4 5/8" Long with 5/8" Mounting Diameter ID .320" OD .400" Wall .072" Length: 4.625 Mount Size: 0.625 Price: $11.50 Add to Order Form

Quad Tines - Super Quad™ Tines
1Q375504 Click here for more information	DILLENNIUM® SuperQuad™ Coring Tine, Side Eject, 3/8" x 4 5/8" Long with 3/4" Mounting Diameter ID .320" OD .460" Wall .072" Length: 4.625 Mount Size: 0.75 Price: $11.50 Add to Order Form

Quad Tines - Super Quad™ Tines
1Q375505 Click here for more information	DILLENNIUM® SuperQuad™ Coring Tine side eject, 3/8" x 4.625" Length with 3/8" Mounting Diameter ID .320" OD .400" Wall .072" Length: 4.625 Mount Size: 0.375 Price: $11.50 Add to Order Form

Quad Tines - Super Quad™ Tines
1Q375506 Click here for more information	DILLENNIUM® SuperQuad™ Coring Tine, Side eject, 3/8" x 4.625" Length with 12mm Mounting Diameter ID .320" OD .400" Wall .072" Length: 4.625 Mount Size: 0.472 Price: $11.50 Add to Order Form

Quad Tines - Super Quad™ Tines
1Q375511 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject 3/8" x5.125" with 3/8" Mount Diameter ID .320" OD .400" Wall .072" Length: 5.125 Mount Size: 0.375 Price: $12.05 Add to Order Form

New Products
1Q375511 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject 3/8" x5.125" with 3/8" Mount Diameter ID .320" OD .400" Wall .072" Length: 5.125 Mount Size: 0.375 Price: $12.05 Add to Order Form

New Products
1Q375805 Click here for more information	INFINITY 3/8" side-eject Quad tine. 4.5" length, 3/8" mount; .335" ID, .460" OD, wall .072" Length: 4.5 Mount Size: 0.375 Price: $10.50 Add to Order Form

Quad Tines - Super Quad™ Tines
1Q375805 Click here for more information	INFINITY 3/8" side-eject Quad tine. 4.5" length, 3/8" mount; .335" ID, .460" OD, wall .072" Length: 4.5 Mount Size: 0.375 Price: $10.50 Add to Order Form

Quad Tines
1Q375805 Click here for more information	INFINITY 3/8" side-eject Quad tine. 4.5" length, 3/8" mount; .335" ID, .460" OD, wall .072" Length: 4.5 Mount Size: 0.375 Price: $10.50 Add to Order Form

INFINITY tines
1Q375805 Click here for more information	INFINITY 3/8" side-eject Quad tine. 4.5" length, 3/8" mount; .335" ID, .460" OD, wall .072" Length: 4.5 Mount Size: 0.375 Price: $10.50 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1Q450101 Click here for more information	Premium Magnum Lite™ Tine, side eject 4.5" long with a 5/8" mounting diameter ID .350" OD .480" Wall .065" Length: 4.5 Mount Size: 0.625 Price: $7.65 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1Q450102 Click here for more information	Premium Magnum Lite™ Tine, side eject 4.5" long with 1/2" mount ID .350" OD .480" Wall .065" Length: 4.5 Mount Size: 0.5 Price: $7.65 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1Q450103 Click here for more information	Premium Magnum Lite™ Tine, side eject 3.5" long with 1/2" mount ID .350" OD .480" Wall .065" Length: 3.5 Mount Size: 0.5 Price: $7.10 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1Q450104 Click here for more information	Premium Magnum Lite™ Tine Side Eject 4 1/2" with 3/8" mounting diameter ID .350" OD .480" Wall .065" Length: 4.5 Mount Size: 0.375 Price: $7.95 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1Q500101 Click here for more information	Premium Magnum Quad™ Tine, side eject 1/2" x 4.5" with 3/8" mounting diameter. ID .400" OD .525" Wall .072" Length: 4.5 Mount Size: 0.375 Price: $7.95 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1Q500102 Click here for more information	Premium Magnum Quad™ Tine, side eject 1/2" x 4.5" with 1/2" mounting diameter ID .400" OD .525" Wall .072" Length: 4.5 Mount Size: 0.5 Price: $7.95 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1Q500103 Click here for more information	Premium Magnum Quad™ Tine, side eject 1/2" x 5.5" with 3/8" mounting diameter ID .400" OD .525" Wall .072" Length: 5.5 Mount Size: 0.375 Price: $8.20 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1Q500104 Click here for more information	Premium Magnum Quad™ Tine, side eject 1/2" x 5.5" with 1/2" mounting diameter ID .400 OD .525" Wall .072" Length: 5.5 Mount Size: 0.5 Price: $8.20 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1Q500105 Click here for more information	Premium Magnum Quad™ Tine, side eject, 1/2" x 3.5" with 3/8" mount ID .400" OD .525" Wall .072" Length: 3.5 Mount Size: 0.375 Price: $7.10 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1Q500106 Click here for more information	Premium Magnum Quad™ Tine, side eject 1/2" x 3.5" with 1/2" mount ID .400" OD .525" Wall .072" Length: 3.5 Mount Size: 0.5 Price: $7.10 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1Q500107 Click here for more information	Premium Magnum Quad™ Tine, side eject 1/2" x 4.5" with 5/8" mount ID .400" OD .525" Wall .072" Length: 4.5 Mount Size: 0.625 Price: $7.95 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1Q500108 Click here for more information	Premium Magnum Quad™ Tine, side eject 1/2" x 4.5 " with 3/4" mount ID .400" OD .525" Wall .072" Length: 4.5 Mount Size: 0.75 Price: $7.95 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1Q500109 Click here for more information	Premium Magnum Quad™, side eject 1/2" x 4.5" with 12 mm Mounting Diameter ID .400" OD .525" Wall .072" Length: 4.5 Mount Size: 0.472 Price: $7.95 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1Q500110 Click here for more information	Premium MagnumQuad™ Tine side eject 1/2" x 6.50" with 5/16" Mount Diameter ID .400" OD .525" Wall .072" Length: 6.5 Mount Size: 0.313 Price: $8.75 Add to Order Form

New Products
1Q500110 Click here for more information	Premium MagnumQuad™ Tine side eject 1/2" x 6.50" with 5/16" Mount Diameter ID .400" OD .525" Wall .072" Length: 6.5 Mount Size: 0.313 Price: $8.75 Add to Order Form

New Products
1Q500111 Click here for more information	Premium MagnumQuad™ Tine side eject 1/2" x 5.50" with 3/4" Mount Diameter ID .400" OD .525" Wall .072" Length: 5.5 Mount Size: 0.75 Price: $8.20 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1Q500111 Click here for more information	Premium MagnumQuad™ Tine side eject 1/2" x 5.50" with 3/4" Mount Diameter ID .400" OD .525" Wall .072" Length: 5.5 Mount Size: 0.75 Price: $8.20 Add to Order Form

Quad Tines - DILLENNIUM® Magnum Quad™ Tines
1Q500501 Click here for more information	DILLENNIUM® Magnum Quad™ Tine, side eject, 1/2" x 4.625" with a 3/8 " Mounting Diameter. ID .403" OD .504" Wall .072" Length: 4.625 Mount Size: 0.375 Price: $11.75 Add to Order Form

Quad Tines - DILLENNIUM® Magnum Quad™ Tines
1Q500502 Click here for more information	DILLENNIUM® Magnum Quad™ Tine, side eject, 1/2" x 4.625" with a 1/2" Mounting Diameter ID .403" OD .504" Wall .072" Length: 4.625 Mount Size: 0.5 Price: $11.75 Add to Order Form

Quad Tines - DILLENNIUM® Magnum Quad™ Tines
1Q500503 Click here for more information	DILLENNIUM® Magnum Quad™ Tine, side eject 1/2" x 5.625" with a 3/8" Mounting Diameter ID .403" OD .504" Wall .072" Length: 5.625 Mount Size: 0.375 Price: $12.30 Add to Order Form

Quad Tines - DILLENNIUM® Magnum Quad™ Tines
1Q500504 Click here for more information	DILLENNIUM® Magnum Quad™ Tine, side eject 1/2" x 5.625" with 1/2" Mounting Diameter ID .403" OD .504" Wall .072" Length: 5.625 Mount Size: 0.5 Price: $12.30 Add to Order Form

Quad Tines - DILLENNIUM® Magnum Quad™ Tines
1Q500505 Click here for more information	DILLENNIUM® Magnum Quad™ Tine, side eject 1/2" x 3.625" with a 3/8" Mounting Diameter ID .403" OD .504" Wall .072" Length: 3.625 Mount Size: 0.375 Price: $11.20 Add to Order Form

Quad Tines - DILLENNIUM® Magnum Quad™ Tines
1Q500506 Click here for more information	DILLENNIUM® Magnum Quad™ Tine, side eject 1/2" x 3.625" with a 1/2" Mounting Diameter ID .403" OD .504" Wall .072" Length: 3.625 Mount Size: 0.5 Price: $11.20 Add to Order Form

Quad Tines - DILLENNIUM® Magnum Quad™ Tines
1Q500507 Click here for more information	DILLENNIUM® Magnum Quad™ Tine, side eject 1/2" x 4.625" witha 5/8" Mounting Diameter ID .403" OD .504" Wall .072" Length: 4.625 Mount Size: 0.625 Price: $11.75 Add to Order Form

Quad Tines - DILLENNIUM® Magnum Quad™ Tines
1Q500508 Click here for more information	DILLENNIUM® Magnum Quad™ Tine, side eject 1/2" x 4.625" with a 3/4" Mounting Diameter. ID .403" OD .504" Wall .072" Length: 4.625 Mount Size: 0.75 Price: $11.75 Add to Order Form

Quad Tines - DILLENNIUM® Magnum Quad™ Tines
1Q500509 Click here for more information	DILLENNIUM® MagnumQuad™ Tine 1/2" x 4.625" with 12mm mount diameter ID .403" OD .504" Wall .072" Length: 4.625 Mount Size: 0.472 Price: $11.60 Add to Order Form

New Products
1Q500509 Click here for more information	DILLENNIUM® MagnumQuad™ Tine 1/2" x 4.625" with 12mm mount diameter ID .403" OD .504" Wall .072" Length: 4.625 Mount Size: 0.472 Price: $11.60 Add to Order Form

New Products
1Q500510 Click here for more information	DILLENNIUM® MagnumQuad™ Tine 1/2" x 6.625" with 5/16" Mount Diameter ID .403" OD .504" Wall .072" Length: 6.625 Mount Size: 0.313 Price: $12.55 Add to Order Form

Quad Tines - DILLENNIUM® Magnum Quad™ Tines
1Q500510 Click here for more information	DILLENNIUM® MagnumQuad™ Tine 1/2" x 6.625" with 5/16" Mount Diameter ID .403" OD .504" Wall .072" Length: 6.625 Mount Size: 0.313 Price: $12.55 Add to Order Form

Quad Tines - DILLENNIUM® Magnum Quad™ Tines
1Q500511 Click here for more information	DILLENNIUM® MagnumQuad™ Tine 1/2" x 5.625" with 3/4" Mount Diameter ID .403" OD .504" Wall .072" Length: 5.625 Mount Size: 0.75 Price: $12.05 Add to Order Form

New Products
1Q500511 Click here for more information	DILLENNIUM® MagnumQuad™ Tine 1/2" x 5.625" with 3/4" Mount Diameter ID .403" OD .504" Wall .072" Length: 5.625 Mount Size: 0.75 Price: $12.05 Add to Order Form

New Products
1Q500802 Click here for more information	INFINITY 1/2" side-eject Quad tine 4 1/2" length x 1/2" mount. .400" ID, .525" OD, .072" wall. Length: 4.5 Mount Size: 0.5 Price: $10.75 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1Q500802 Click here for more information	INFINITY 1/2" side-eject Quad tine 4 1/2" length x 1/2" mount. .400" ID, .525" OD, .072" wall. Length: 4.5 Mount Size: 0.5 Price: $10.75 Add to Order Form

Quad Tines
1Q500802 Click here for more information	INFINITY 1/2" side-eject Quad tine 4 1/2" length x 1/2" mount. .400" ID, .525" OD, .072" wall. Length: 4.5 Mount Size: 0.5 Price: $10.75 Add to Order Form

INFINITY tines
1Q500802 Click here for more information	INFINITY 1/2" side-eject Quad tine 4 1/2" length x 1/2" mount. .400" ID, .525" OD, .072" wall. Length: 4.5 Mount Size: 0.5 Price: $10.75 Add to Order Form

INFINITY tines
1Q500803 Click here for more information	INFINITY 1/2" side-eject Quad tine 5 1/2" length x 3/8" mount. .400" ID, .525" OD, .072" wall. Length: 5.5 Mount Size: 0.375 Price: $11.30 Add to Order Form

Quad Tines
1Q500803 Click here for more information	INFINITY 1/2" side-eject Quad tine 5 1/2" length x 3/8" mount. .400" ID, .525" OD, .072" wall. Length: 5.5 Mount Size: 0.375 Price: $11.30 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1Q500803 Click here for more information	INFINITY 1/2" side-eject Quad tine 5 1/2" length x 3/8" mount. .400" ID, .525" OD, .072" wall. Length: 5.5 Mount Size: 0.375 Price: $11.30 Add to Order Form

New Products
1Q500803 Click here for more information	INFINITY 1/2" side-eject Quad tine 5 1/2" length x 3/8" mount. .400" ID, .525" OD, .072" wall. Length: 5.5 Mount Size: 0.375 Price: $11.30 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1Q575102 Click here for more information	Premium Magnum Quad Plus™ side eject .575" x 4.50" with a 1/2" Mounting Diameter ID .470" OD .595" Wall .063" Length: 4.5 Mount Size: 0.5 Price: $8.20 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1Q575103 Click here for more information	Premium Magnum Quad Plus™ side eject .575" x 4.5" with a 3/8" Mounting Diameter ID .470" OD .595" Wall .063" Length: 4.5 Mount Size: 0.375 Price: $8.20 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1Q575104 Click here for more information	Premium Magnum Quad Plus™ side eject .575" x 6" with a 3/8" Mounting Diameter ID .470" OD .595" Wall .063" Length: 6 Mount Size: 0.375 Price: $8.75 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1Q575105 Click here for more information	Premium Magnum Quad Plus™ side eject .575" x 6" with 12mm mounting diameter. ID .470" .595" Wall .063" Length: 6 Mount Size: 0.472 Price: $8.75 Add to Order Form

Quad Tines
1Q575105 Click here for more information	Premium Magnum Quad Plus™ side eject .575" x 6" with 12mm mounting diameter. ID .470" .595" Wall .063" Length: 6 Mount Size: 0.472 Price: $8.75 Add to Order Form

Quad Tines
1Q575106 Click here for more information	Premium Magnum Quad Plus™ side eject .575" x 5 1/2" with 3/4" mounting diameter. ID .470" OD .595" Wall .063" Length: 5.5 Mount Size: 0.75 Price: $8.50 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1Q575106 Click here for more information	Premium Magnum Quad Plus™ side eject .575" x 5 1/2" with 3/4" mounting diameter. ID .470" OD .595" Wall .063" Length: 5.5 Mount Size: 0.75 Price: $8.50 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1Q575107 Click here for more information	Premium Magnum Quad Plus™ Tine .575" x 5" length with 1/2" mount diameter ID .470" OD .595" Wall .063" Length: 5 Mount Size: 0.5 Price: $8.35 Add to Order Form

Quad Tines
1Q575107 Click here for more information	Premium Magnum Quad Plus™ Tine .575" x 5" length with 1/2" mount diameter ID .470" OD .595" Wall .063" Length: 5 Mount Size: 0.5 Price: $8.35 Add to Order Form

New Products
1Q575107 Click here for more information	Premium Magnum Quad Plus™ Tine .575" x 5" length with 1/2" mount diameter ID .470" OD .595" Wall .063" Length: 5 Mount Size: 0.5 Price: $8.35 Add to Order Form

New Products
1Q575108 Click here for more information	Premium Magnum Quad Plus™ Tine .575" X 5.30" length with 3/8" mount diameter ID .465" OD .597" Wall .063" Length: 5.3 Mount Size: 0.375 Price: $8.35 Add to Order Form

Quad Tines
1Q575108 Click here for more information	Premium Magnum Quad Plus™ Tine .575" X 5.30" length with 3/8" mount diameter ID .465" OD .597" Wall .063" Length: 5.3 Mount Size: 0.375 Price: $8.35 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1Q575108 Click here for more information	Premium Magnum Quad Plus™ Tine .575" X 5.30" length with 3/8" mount diameter ID .465" OD .597" Wall .063" Length: 5.3 Mount Size: 0.375 Price: $8.35 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1Q575109 Click here for more information	Premium Magnum Quad Plus™ Tine .575" x 4.50" length with 12mm mount diameter ID .470" OD .595" Wall .063" Length: 4.5 Mount Size: 0.472 Price: $8.20 Add to Order Form

Quad Tines
1Q575109 Click here for more information	Premium Magnum Quad Plus™ Tine .575" x 4.50" length with 12mm mount diameter ID .470" OD .595" Wall .063" Length: 4.5 Mount Size: 0.472 Price: $8.20 Add to Order Form

New Products
1Q575109 Click here for more information	Premium Magnum Quad Plus™ Tine .575" x 4.50" length with 12mm mount diameter ID .470" OD .595" Wall .063" Length: 4.5 Mount Size: 0.472 Price: $8.20 Add to Order Form

New Products
1Q575502 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 4.50" length with 1/2" mount diameter ID .465" OD .597" Wall .063" Length: 4.5 Mount Size: 0.5 Price: $12.05 Add to Order Form

Quad Tines
1Q575502 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 4.50" length with 1/2" mount diameter ID .465" OD .597" Wall .063" Length: 4.5 Mount Size: 0.5 Price: $12.05 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1Q575502 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 4.50" length with 1/2" mount diameter ID .465" OD .597" Wall .063" Length: 4.5 Mount Size: 0.5 Price: $12.05 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1Q575503 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 4.50" with 3/8" Mount Diameter ID .465" OD .597" Wall .063" Length: 4.5 Mount Size: 0.375 Price: $12.05 Add to Order Form

Quad Tines
1Q575503 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 4.50" with 3/8" Mount Diameter ID .465" OD .597" Wall .063" Length: 4.5 Mount Size: 0.375 Price: $12.05 Add to Order Form

New Products
1Q575503 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 4.50" with 3/8" Mount Diameter ID .465" OD .597" Wall .063" Length: 4.5 Mount Size: 0.375 Price: $12.05 Add to Order Form

New Products
1Q575504 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 6" length with 3/8" mount diameter ID .465" OD .597" Wall .063" Length: 6 Mount Size: 0.375 Price: $12.55 Add to Order Form

Quad Tines
1Q575504 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 6" length with 3/8" mount diameter ID .465" OD .597" Wall .063" Length: 6 Mount Size: 0.375 Price: $12.55 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1Q575504 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 6" length with 3/8" mount diameter ID .465" OD .597" Wall .063" Length: 6 Mount Size: 0.375 Price: $12.55 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1Q575505 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 6" length with 12mm mount diameter ID .465" OD .597" Wall .063" Length: 6 Mount Size: 0.472 Price: $12.55 Add to Order Form

Quad Tines
1Q575505 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 6" length with 12mm mount diameter ID .465" OD .597" Wall .063" Length: 6 Mount Size: 0.472 Price: $12.55 Add to Order Form

New Products
1Q575505 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 6" length with 12mm mount diameter ID .465" OD .597" Wall .063" Length: 6 Mount Size: 0.472 Price: $12.55 Add to Order Form

New Products
1Q575506 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 5.50" with 3/4" mount diameter ID .465" OD .597" Wall .063" Length: 5.5 Mount Size: 0.75 Price: $12.30 Add to Order Form

Quad Tines
1Q575506 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 5.50" with 3/4" mount diameter ID .465" OD .597" Wall .063" Length: 5.5 Mount Size: 0.75 Price: $12.30 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1Q575506 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 5.50" with 3/4" mount diameter ID .465" OD .597" Wall .063" Length: 5.5 Mount Size: 0.75 Price: $12.30 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1Q575507 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 5" length with 1/2" mount diameter ID .465" OD .597" Wall .063" Length: 5 Mount Size: 0.5 Price: $12.20 Add to Order Form

Quad Tines
1Q575507 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 5" length with 1/2" mount diameter ID .465" OD .597" Wall .063" Length: 5 Mount Size: 0.5 Price: $12.20 Add to Order Form

New Products
1Q575507 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 5" length with 1/2" mount diameter ID .465" OD .597" Wall .063" Length: 5 Mount Size: 0.5 Price: $12.20 Add to Order Form

New Products
1Q575508 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 5.30" length with 3/8" mount diameter ID .465" OD .597" Wall .063" Length: 0 Mount Size: 0.375 Price: $12.20 Add to Order Form

Quad Tines
1Q575508 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 5.30" length with 3/8" mount diameter ID .465" OD .597" Wall .063" Length: 0 Mount Size: 0.375 Price: $12.20 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1Q575508 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 5.30" length with 3/8" mount diameter ID .465" OD .597" Wall .063" Length: 0 Mount Size: 0.375 Price: $12.20 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1Q575509 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 4.50" length with 12mm mount diameter ID .465" OD .597" Wall .063" Length: 4.5 Mount Size: 0.472 Price: $12.05 Add to Order Form

Quad Tines
1Q575509 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 4.50" length with 12mm mount diameter ID .465" OD .597" Wall .063" Length: 4.5 Mount Size: 0.472 Price: $12.05 Add to Order Form

New Products
1Q575509 Click here for more information	DILLENNIUM® Magnum Quad Plus™ Tine .575" x 4.50" length with 12mm mount diameter ID .465" OD .597" Wall .063" Length: 4.5 Mount Size: 0.472 Price: $12.05 Add to Order Form

New Products
1Q575802 Click here for more information	INFINITY .575" side-eject Quad tine, 4 1/2" length x 1/2" mount, .470" ID, .595: OD, .063" wall. Length: 4.5 Mount Size: 0.5 Price: $11.05 Add to Order Form

Quad Tines
1Q575802 Click here for more information	INFINITY .575" side-eject Quad tine, 4 1/2" length x 1/2" mount, .470" ID, .595: OD, .063" wall. Length: 4.5 Mount Size: 0.5 Price: $11.05 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1Q575802 Click here for more information	INFINITY .575" side-eject Quad tine, 4 1/2" length x 1/2" mount, .470" ID, .595: OD, .063" wall. Length: 4.5 Mount Size: 0.5 Price: $11.05 Add to Order Form

INFINITY tines
1Q575802 Click here for more information	INFINITY .575" side-eject Quad tine, 4 1/2" length x 1/2" mount, .470" ID, .595: OD, .063" wall. Length: 4.5 Mount Size: 0.5 Price: $11.05 Add to Order Form

INFINITY tines
1Q575804 Click here for more information	INFINITY .575" side-eject Quad tine, 6" length x 3/8" mount, .470" ID, .595: OD, .063" wall. Length: 6 Mount Size: 0.375 Price: $11.55 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1Q575804 Click here for more information	INFINITY .575" side-eject Quad tine, 6" length x 3/8" mount, .470" ID, .595: OD, .063" wall. Length: 6 Mount Size: 0.375 Price: $11.55 Add to Order Form

Quad Tines
1Q575804 Click here for more information	INFINITY .575" side-eject Quad tine, 6" length x 3/8" mount, .470" ID, .595: OD, .063" wall. Length: 6 Mount Size: 0.375 Price: $11.55 Add to Order Form

New Products
1Q575804 Click here for more information	INFINITY .575" side-eject Quad tine, 6" length x 3/8" mount, .470" ID, .595: OD, .063" wall. Length: 6 Mount Size: 0.375 Price: $11.55 Add to Order Form

New Products
1Q625101 Click here for more information	Premium Magnum Quad Plus™ 5/8" x 5.50" length with 3/4" mount diameter ID .500" ID .630" Wall .063" Length: 5.5 Mount Size: 0.75 Price: $8.30 Add to Order Form

Quad Tines
1Q625101 Click here for more information	Premium Magnum Quad Plus™ 5/8" x 5.50" length with 3/4" mount diameter ID .500" ID .630" Wall .063" Length: 5.5 Mount Size: 0.75 Price: $8.30 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1Q625101 Click here for more information	Premium Magnum Quad Plus™ 5/8" x 5.50" length with 3/4" mount diameter ID .500" ID .630" Wall .063" Length: 5.5 Mount Size: 0.75 Price: $8.30 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1Q625103 Click here for more information	Premium Magnum Quad Plus™ 5/8" x 4.50" length with 3/8" mount diameter ID .510" OD .630" Wall .063 Length: 4.5 Mount Size: 0.375 Price: $8.30 Add to Order Form

Quad Tines
1Q625103 Click here for more information	Premium Magnum Quad Plus™ 5/8" x 4.50" length with 3/8" mount diameter ID .510" OD .630" Wall .063 Length: 4.5 Mount Size: 0.375 Price: $8.30 Add to Order Form

New Products
1Q625103 Click here for more information	Premium Magnum Quad Plus™ 5/8" x 4.50" length with 3/8" mount diameter ID .510" OD .630" Wall .063 Length: 4.5 Mount Size: 0.375 Price: $8.30 Add to Order Form

New Products
1QT250101 Click here for more information	Premium Quad Coring Tine, Side Eject Fro Toro® 1/4" X 3 1/2" with 3/8" Mounting Diameter ID .240" OD .330" Wall .065" Length: 3.5 Mount Size: 0.375 Price: $4.95 Add to Order Form

Quad Tines
1QT250101 Click here for more information	Premium Quad Coring Tine, Side Eject Fro Toro® 1/4" X 3 1/2" with 3/8" Mounting Diameter ID .240" OD .330" Wall .065" Length: 3.5 Mount Size: 0.375 Price: $4.95 Add to Order Form

Quad Tines - Standard Quad Tines
1QT250101 Click here for more information	Premium Quad Coring Tine, Side Eject Fro Toro® 1/4" X 3 1/2" with 3/8" Mounting Diameter ID .240" OD .330" Wall .065" Length: 3.5 Mount Size: 0.375 Price: $4.95 Add to Order Form

Quad Tines - Standard Quad Tines
1QT250103 Click here for more information	Premium Quad Coring Tine, Side Eject Fro Toro® 1/4" X 5" with 3/8" Mounting Diameter ID .240" OD .330" Wall .065" Length: 5 Mount Size: 0.375 Price: $6.00 Add to Order Form

Quad Tines
1QT250103 Click here for more information	Premium Quad Coring Tine, Side Eject Fro Toro® 1/4" X 5" with 3/8" Mounting Diameter ID .240" OD .330" Wall .065" Length: 5 Mount Size: 0.375 Price: $6.00 Add to Order Form

New Products
1QT250103 Click here for more information	Premium Quad Coring Tine, Side Eject Fro Toro® 1/4" X 5" with 3/8" Mounting Diameter ID .240" OD .330" Wall .065" Length: 5 Mount Size: 0.375 Price: $6.00 Add to Order Form

New Products
1QT250105 Click here for more information	Premium Quad Coring Tine, Side Eject Fro Toro® 1/4" X 4 1/2" with 3/8" Mounting Diameter ID .240" OD .330" Wall .065" Length: 4.5 Mount Size: 0.375 Price: $5.75 Add to Order Form

Quad Tines
1QT250105 Click here for more information	Premium Quad Coring Tine, Side Eject Fro Toro® 1/4" X 4 1/2" with 3/8" Mounting Diameter ID .240" OD .330" Wall .065" Length: 4.5 Mount Size: 0.375 Price: $5.75 Add to Order Form

Quad Tines - Standard Quad Tines
1QT250105 Click here for more information	Premium Quad Coring Tine, Side Eject Fro Toro® 1/4" X 4 1/2" with 3/8" Mounting Diameter ID .240" OD .330" Wall .065" Length: 4.5 Mount Size: 0.375 Price: $5.75 Add to Order Form

Quad Tines - Standard Quad Tines
1QT250501 Click here for more information	DILLENNIUM® Quad Coring Tine, Side Eject Fro Toro® 1/4" X 3 5/8" with 3/8" Mounting Diameter ID .240" OD .327" Wall .065" Length: 3.625 Mount Size: 0.375 Price: $9.85 Add to Order Form

Quad Tines
1QT250501 Click here for more information	DILLENNIUM® Quad Coring Tine, Side Eject Fro Toro® 1/4" X 3 5/8" with 3/8" Mounting Diameter ID .240" OD .327" Wall .065" Length: 3.625 Mount Size: 0.375 Price: $9.85 Add to Order Form

New Products
1QT250501 Click here for more information	DILLENNIUM® Quad Coring Tine, Side Eject Fro Toro® 1/4" X 3 5/8" with 3/8" Mounting Diameter ID .240" OD .327" Wall .065" Length: 3.625 Mount Size: 0.375 Price: $9.85 Add to Order Form

New Products
1QT250503 Click here for more information	DILLENNIUM® Quad Coring Tine, Side Eject Fro Toro® 1/4" X 5.125" with 3/8" Mounting Diameter ID .240" OD .327" Wall .065" Length: 0 Mount Size: 0.375 Price: $11.50 Add to Order Form

Quad Tines
1QT250503 Click here for more information	DILLENNIUM® Quad Coring Tine, Side Eject Fro Toro® 1/4" X 5.125" with 3/8" Mounting Diameter ID .240" OD .327" Wall .065" Length: 0 Mount Size: 0.375 Price: $11.50 Add to Order Form

Quad Tines - Standard Quad Tines
1QT250503 Click here for more information	DILLENNIUM® Quad Coring Tine, Side Eject Fro Toro® 1/4" X 5.125" with 3/8" Mounting Diameter ID .240" OD .327" Wall .065" Length: 0 Mount Size: 0.375 Price: $11.50 Add to Order Form

Quad Tines - Standard Quad Tines
1QT250505 Click here for more information	DILLENNIUM® Quad Coring Tine, Side Eject Fro Toro® 1/4" X 4 5/8" with 3/8" Mounting Diameter ID .240" OD .327" Wall .065" Length: 4.625 Mount Size: 0.375 Price: $10.95 Add to Order Form

Quad Tines
1QT250505 Click here for more information	DILLENNIUM® Quad Coring Tine, Side Eject Fro Toro® 1/4" X 4 5/8" with 3/8" Mounting Diameter ID .240" OD .327" Wall .065" Length: 4.625 Mount Size: 0.375 Price: $10.95 Add to Order Form

New Products
1QT250505 Click here for more information	DILLENNIUM® Quad Coring Tine, Side Eject Fro Toro® 1/4" X 4 5/8" with 3/8" Mounting Diameter ID .240" OD .327" Wall .065" Length: 4.625 Mount Size: 0.375 Price: $10.95 Add to Order Form

New Products
1QT250803 Click here for more information	INFINITY 1/4" side-eject Quad tine with Toro shank. 5" length, 3/8" mount; .240" ID, .330" OD, .065" wall Length: 5 Mount Size: 0.375 Price: $10.50 Add to Order Form

Quad Tines
1QT250803 Click here for more information	INFINITY 1/4" side-eject Quad tine with Toro shank. 5" length, 3/8" mount; .240" ID, .330" OD, .065" wall Length: 5 Mount Size: 0.375 Price: $10.50 Add to Order Form

Quad Tines - Standard Quad Tines
1QT250803 Click here for more information	INFINITY 1/4" side-eject Quad tine with Toro shank. 5" length, 3/8" mount; .240" ID, .330" OD, .065" wall Length: 5 Mount Size: 0.375 Price: $10.50 Add to Order Form

INFINITY tines
1QT250803 Click here for more information	INFINITY 1/4" side-eject Quad tine with Toro shank. 5" length, 3/8" mount; .240" ID, .330" OD, .065" wall Length: 5 Mount Size: 0.375 Price: $10.50 Add to Order Form

INFINITY tines
1QT250805 Click here for more information	INFINITY 1/4" side-eject Quad tine (Toro shank). 4.5" length, 3/8" mount; .240" ID, .330" OD, wall .065" Length: 4.5 Mount Size: 0.375 Price: $9.95 Add to Order Form

Quad Tines - Standard Quad Tines
1QT250805 Click here for more information	INFINITY 1/4" side-eject Quad tine (Toro shank). 4.5" length, 3/8" mount; .240" ID, .330" OD, wall .065" Length: 4.5 Mount Size: 0.375 Price: $9.95 Add to Order Form

Quad Tines
1QT250805 Click here for more information	INFINITY 1/4" side-eject Quad tine (Toro shank). 4.5" length, 3/8" mount; .240" ID, .330" OD, wall .065" Length: 4.5 Mount Size: 0.375 Price: $9.95 Add to Order Form

New Products
1QT250805 Click here for more information	INFINITY 1/4" side-eject Quad tine (Toro shank). 4.5" length, 3/8" mount; .240" ID, .330" OD, wall .065" Length: 4.5 Mount Size: 0.375 Price: $9.95 Add to Order Form

New Products
1QT375100 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® 3/8" x 3.50" with 3/8" Mounting Diameter ID .335" OD .460" Wall .072" Length: 3.5 Mount Size: 0.375 Price: $6.30 Add to Order Form

Quad Tines
1QT375100 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® 3/8" x 3.50" with 3/8" Mounting Diameter ID .335" OD .460" Wall .072" Length: 3.5 Mount Size: 0.375 Price: $6.30 Add to Order Form

Quad Tines - Super Quad™ Tines
1QT375100 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® 3/8" x 3.50" with 3/8" Mounting Diameter ID .335" OD .460" Wall .072" Length: 3.5 Mount Size: 0.375 Price: $6.30 Add to Order Form

Quad Tines - Super Quad™ Tines
1QT375105 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® 3/8" x 4.50" with 3/8" Mounting Diameter ID .335" OD .460" Wall .072" Length: 4.5 Mount Size: 0.375 Price: $7.40 Add to Order Form

Quad Tines
1QT375105 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® 3/8" x 4.50" with 3/8" Mounting Diameter ID .335" OD .460" Wall .072" Length: 4.5 Mount Size: 0.375 Price: $7.40 Add to Order Form

New Products
1QT375105 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® 3/8" x 4.50" with 3/8" Mounting Diameter ID .335" OD .460" Wall .072" Length: 4.5 Mount Size: 0.375 Price: $7.40 Add to Order Form

New Products
1QT375111 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® 3/8" x 5" with 3/8" Mounting Diameter ID .335" OD .460" Wall .072" Length: 5 Mount Size: 0.375 Price: $7.65 Add to Order Form

Quad Tines
1QT375111 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® 3/8" x 5" with 3/8" Mounting Diameter ID .335" OD .460" Wall .072" Length: 5 Mount Size: 0.375 Price: $7.65 Add to Order Form

Quad Tines - Super Quad™ Tines
1QT375111 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® 3/8" x 5" with 3/8" Mounting Diameter ID .335" OD .460" Wall .072" Length: 5 Mount Size: 0.375 Price: $7.65 Add to Order Form

Quad Tines - Super Quad™ Tines
1QT375500 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® 3/8" x 3.625" with 3/8" Mount Diameter ID .295" OD .400" Wall .072" Length: 3.625 Mount Size: 0.375 Price: $0.00 Add to Order Form

Quad Tines
1QT375500 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® 3/8" x 3.625" with 3/8" Mount Diameter ID .295" OD .400" Wall .072" Length: 3.625 Mount Size: 0.375 Price: $0.00 Add to Order Form

New Products
1QT375500 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® 3/8" x 3.625" with 3/8" Mount Diameter ID .295" OD .400" Wall .072" Length: 3.625 Mount Size: 0.375 Price: $0.00 Add to Order Form

New Products
1QT375505 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® 3/8" x 4.625" with 3/8" Mount Diameter ID .295" OD .400" Wall .072" Length: 4.625 Mount Size: 0.375 Price: $11.50 Add to Order Form

Quad Tines
1QT375505 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® 3/8" x 4.625" with 3/8" Mount Diameter ID .295" OD .400" Wall .072" Length: 4.625 Mount Size: 0.375 Price: $11.50 Add to Order Form

Quad Tines - Super Quad™ Tines
1QT375505 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® 3/8" x 4.625" with 3/8" Mount Diameter ID .295" OD .400" Wall .072" Length: 4.625 Mount Size: 0.375 Price: $11.50 Add to Order Form

Quad Tines - Super Quad™ Tines
1QT375511 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® 3/8" x 5.125" with 3/8" Mount Diameter ID .295" OD .400" Wall .072" Length: 0 Mount Size: 0.375 Price: $12.05 Add to Order Form

Quad Tines
1QT375511 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® 3/8" x 5.125" with 3/8" Mount Diameter ID .295" OD .400" Wall .072" Length: 0 Mount Size: 0.375 Price: $12.05 Add to Order Form

New Products
1QT375511 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® 3/8" x 5.125" with 3/8" Mount Diameter ID .295" OD .400" Wall .072" Length: 0 Mount Size: 0.375 Price: $12.05 Add to Order Form

New Products
1QT375805 Click here for more information	INFINITY 3/8" side-eject Quad tine (Toro shank). 4.5" length, 3/8" mount; .335" ID, .460" OD, wall .072" Length: 4.5 Mount Size: 0.375 Price: $0.00 Add to Order Form

Quad Tines
1QT375805 Click here for more information	INFINITY 3/8" side-eject Quad tine (Toro shank). 4.5" length, 3/8" mount; .335" ID, .460" OD, wall .072" Length: 4.5 Mount Size: 0.375 Price: $0.00 Add to Order Form

Quad Tines - Super Quad™ Tines
1QT375805 Click here for more information	INFINITY 3/8" side-eject Quad tine (Toro shank). 4.5" length, 3/8" mount; .335" ID, .460" OD, wall .072" Length: 4.5 Mount Size: 0.375 Price: $0.00 Add to Order Form

INFINITY tines
1QT375805 Click here for more information	INFINITY 3/8" side-eject Quad tine (Toro shank). 4.5" length, 3/8" mount; .335" ID, .460" OD, wall .072" Length: 4.5 Mount Size: 0.375 Price: $0.00 Add to Order Form

INFINITY tines
1QT375811 Click here for more information	INFINITY 3/8" side-eject Quad tine (Toro shank). 5" length, 3/8" mount; .335" ID, .460" OD, wall .072" Length: 5 Mount Size: 0.375 Price: $11.05 Add to Order Form

Quad Tines - Super Quad™ Tines
1QT375811 Click here for more information	INFINITY 3/8" side-eject Quad tine (Toro shank). 5" length, 3/8" mount; .335" ID, .460" OD, wall .072" Length: 5 Mount Size: 0.375 Price: $11.05 Add to Order Form

Quad Tines
1QT375811 Click here for more information	INFINITY 3/8" side-eject Quad tine (Toro shank). 5" length, 3/8" mount; .335" ID, .460" OD, wall .072" Length: 5 Mount Size: 0.375 Price: $11.05 Add to Order Form

New Products
1QT375811 Click here for more information	INFINITY 3/8" side-eject Quad tine (Toro shank). 5" length, 3/8" mount; .335" ID, .460" OD, wall .072" Length: 5 Mount Size: 0.375 Price: $11.05 Add to Order Form

New Products
1QT450104 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® .450" x 4.50" with 3/8" Mounting Diameter ID .350" OD .480" Wall .065" Length: 4.5 Mount Size: 0.375 Price: $7.95 Add to Order Form

Quad Tines
1QT450104 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® .450" x 4.50" with 3/8" Mounting Diameter ID .350" OD .480" Wall .065" Length: 4.5 Mount Size: 0.375 Price: $7.95 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1QT450104 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® .450" x 4.50" with 3/8" Mounting Diameter ID .350" OD .480" Wall .065" Length: 4.5 Mount Size: 0.375 Price: $7.95 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1QT500101 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® 1/2" x 4.50" with 3/8" Mounting Diameter ID .400" OD .525" Wall .072" Length: 4.5 Mount Size: 0.375 Price: $7.95 Add to Order Form

Quad Tines
1QT500101 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® 1/2" x 4.50" with 3/8" Mounting Diameter ID .400" OD .525" Wall .072" Length: 4.5 Mount Size: 0.375 Price: $7.95 Add to Order Form

New Products
1QT500101 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® 1/2" x 4.50" with 3/8" Mounting Diameter ID .400" OD .525" Wall .072" Length: 4.5 Mount Size: 0.375 Price: $7.95 Add to Order Form

New Products
1QT500103 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® 1/2" x 5.50" with 3/8" Mounting Diameter ID .400" OD .525" Wall .072" Length: 5.5 Mount Size: 0.375 Price: $8.20 Add to Order Form

Quad Tines
1QT500103 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® 1/2" x 5.50" with 3/8" Mounting Diameter ID .400" OD .525" Wall .072" Length: 5.5 Mount Size: 0.375 Price: $8.20 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1QT500103 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® 1/2" x 5.50" with 3/8" Mounting Diameter ID .400" OD .525" Wall .072" Length: 5.5 Mount Size: 0.375 Price: $8.20 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1QT500105 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® 1/2" x 3.50" with 3/8" Mounting Diameter ID .400" OD .525" Wall .072" Length: 3.5 Mount Size: 0.375 Price: $7.10 Add to Order Form

Quad Tines
1QT500105 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® 1/2" x 3.50" with 3/8" Mounting Diameter ID .400" OD .525" Wall .072" Length: 3.5 Mount Size: 0.375 Price: $7.10 Add to Order Form

New Products
1QT500105 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® 1/2" x 3.50" with 3/8" Mounting Diameter ID .400" OD .525" Wall .072" Length: 3.5 Mount Size: 0.375 Price: $7.10 Add to Order Form

New Products
1QT500501 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® 1/2" x 4.625" with 3/8" Mounting Diameter ID .403" OD .504" Wall .072" Length: 4.625 Mount Size: 0.375 Price: $11.75 Add to Order Form

Quad Tines
1QT500501 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® 1/2" x 4.625" with 3/8" Mounting Diameter ID .403" OD .504" Wall .072" Length: 4.625 Mount Size: 0.375 Price: $11.75 Add to Order Form

Quad Tines - DILLENNIUM® Magnum Quad™ Tines
1QT500501 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® 1/2" x 4.625" with 3/8" Mounting Diameter ID .403" OD .504" Wall .072" Length: 4.625 Mount Size: 0.375 Price: $11.75 Add to Order Form

Quad Tines - DILLENNIUM® Magnum Quad™ Tines
1QT500503 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® 1/2" x 5.625" with 3/8" Mounting Diameter ID .403" OD .504" Wall .072" Length: 0 Mount Size: 0.375 Price: $12.30 Add to Order Form

Quad Tines
1QT500503 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® 1/2" x 5.625" with 3/8" Mounting Diameter ID .403" OD .504" Wall .072" Length: 0 Mount Size: 0.375 Price: $12.30 Add to Order Form

New Products
1QT500503 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® 1/2" x 5.625" with 3/8" Mounting Diameter ID .403" OD .504" Wall .072" Length: 0 Mount Size: 0.375 Price: $12.30 Add to Order Form

New Products
1QT500505 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® 1/2" x 3.625" with 3/8" Mounting Diameter ID .403" OD .504" Wall .072" Length: 3.625 Mount Size: 0.375 Price: $11.20 Add to Order Form

Quad Tines
1QT500505 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® 1/2" x 3.625" with 3/8" Mounting Diameter ID .403" OD .504" Wall .072" Length: 3.625 Mount Size: 0.375 Price: $11.20 Add to Order Form

Quad Tines - DILLENNIUM® Magnum Quad™ Tines
1QT500505 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® 1/2" x 3.625" with 3/8" Mounting Diameter ID .403" OD .504" Wall .072" Length: 3.625 Mount Size: 0.375 Price: $11.20 Add to Order Form

Quad Tines
1QT500801 Click here for more information	INFINITY 1/2" side-eject Quad tine (Toro shank), 4 1/2" length x 3/8" mount, .400" ID, .525: OD, .072" wall. Length: 4.5 Mount Size: 0.375 Price: $10.75 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1QT500801 Click here for more information	INFINITY 1/2" side-eject Quad tine (Toro shank), 4 1/2" length x 3/8" mount, .400" ID, .525: OD, .072" wall. Length: 4.5 Mount Size: 0.375 Price: $10.75 Add to Order Form

New Products
1QT500801 Click here for more information	INFINITY 1/2" side-eject Quad tine (Toro shank), 4 1/2" length x 3/8" mount, .400" ID, .525: OD, .072" wall. Length: 4.5 Mount Size: 0.375 Price: $10.75 Add to Order Form

INFINITY tines
1QT500801 Click here for more information	INFINITY 1/2" side-eject Quad tine (Toro shank), 4 1/2" length x 3/8" mount, .400" ID, .525: OD, .072" wall. Length: 4.5 Mount Size: 0.375 Price: $10.75 Add to Order Form

INFINITY tines
1QT500803 Click here for more information	INFINITY 1/2" side-eject Quad tine (Toro shank), 4 1/2" length x 3/8" mount, .400" ID, .525: OD, .072" wall. Length: 4.5 Mount Size: 0.375 Price: $11.30 Add to Order Form

New Products
1QT500803 Click here for more information	INFINITY 1/2" side-eject Quad tine (Toro shank), 4 1/2" length x 3/8" mount, .400" ID, .525: OD, .072" wall. Length: 4.5 Mount Size: 0.375 Price: $11.30 Add to Order Form

Quad Tines - Magnum Quad™ Tines
1QT500803 Click here for more information	INFINITY 1/2" side-eject Quad tine (Toro shank), 4 1/2" length x 3/8" mount, .400" ID, .525: OD, .072" wall. Length: 4.5 Mount Size: 0.375 Price: $11.30 Add to Order Form

Quad Tines
1QT500803 Click here for more information	INFINITY 1/2" side-eject Quad tine (Toro shank), 4 1/2" length x 3/8" mount, .400" ID, .525: OD, .072" wall. Length: 4.5 Mount Size: 0.375 Price: $11.30 Add to Order Form

Quad Tines
1QT575103 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® .575" x 4.5" with 3/8" Mounting Diameter ID .470" OD .595" Wall .063" Length: 4.5 Mount Size: 0.375 Price: $8.20 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1QT575103 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® .575" x 4.5" with 3/8" Mounting Diameter ID .470" OD .595" Wall .063" Length: 4.5 Mount Size: 0.375 Price: $8.20 Add to Order Form

New Products
1QT575103 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® .575" x 4.5" with 3/8" Mounting Diameter ID .470" OD .595" Wall .063" Length: 4.5 Mount Size: 0.375 Price: $8.20 Add to Order Form

New Products
1QT575104 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® .575" x 5.30" with 3/8" Mounting Diameter ID .470" OD .595" Wall .063" Length: 6 Mount Size: 0.375 Price: $8.75 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1QT575104 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® .575" x 5.30" with 3/8" Mounting Diameter ID .470" OD .595" Wall .063" Length: 6 Mount Size: 0.375 Price: $8.75 Add to Order Form

Quad Tines
1QT575104 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® .575" x 5.30" with 3/8" Mounting Diameter ID .470" OD .595" Wall .063" Length: 6 Mount Size: 0.375 Price: $8.75 Add to Order Form

Quad Tines
1QT575108 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® .575" x 5.30" with 3/8" Mounting Diameter ID .470" OD .595" Wall .063" Length: 0 Mount Size: 0.375 Price: $8.35 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1QT575108 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® .575" x 5.30" with 3/8" Mounting Diameter ID .470" OD .595" Wall .063" Length: 0 Mount Size: 0.375 Price: $8.35 Add to Order Form

New Products
1QT575108 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® .575" x 5.30" with 3/8" Mounting Diameter ID .470" OD .595" Wall .063" Length: 0 Mount Size: 0.375 Price: $8.35 Add to Order Form

New Products
1QT575503 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® .575" x 4.5" with 3/8" Mounting Diameter ID .465" OD .597" Wall .063" Length: 4.5 Mount Size: 0.375 Price: $12.05 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1QT575503 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® .575" x 4.5" with 3/8" Mounting Diameter ID .465" OD .597" Wall .063" Length: 4.5 Mount Size: 0.375 Price: $12.05 Add to Order Form

Quad Tines
1QT575503 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® .575" x 4.5" with 3/8" Mounting Diameter ID .465" OD .597" Wall .063" Length: 4.5 Mount Size: 0.375 Price: $12.05 Add to Order Form

Quad Tines
1QT575504 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® .575" x 6" with 3/8" Mounting Diameter ID .465" OD .597" Wall .063" Length: 6 Mount Size: 0.375 Price: $12.55 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1QT575504 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® .575" x 6" with 3/8" Mounting Diameter ID .465" OD .597" Wall .063" Length: 6 Mount Size: 0.375 Price: $12.55 Add to Order Form

New Products
1QT575504 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® .575" x 6" with 3/8" Mounting Diameter ID .465" OD .597" Wall .063" Length: 6 Mount Size: 0.375 Price: $12.55 Add to Order Form

New Products
1QT575508 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® .575" x 5.30" with 3/8" Mounting Diameter ID .465" OD .597" Wall .063" Length: 0 Mount Size: 0.375 Price: $12.20 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1QT575508 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® .575" x 5.30" with 3/8" Mounting Diameter ID .465" OD .597" Wall .063" Length: 0 Mount Size: 0.375 Price: $12.20 Add to Order Form

Quad Tines
1QT575508 Click here for more information	DILLENNIUM® SuperQuad™ Tine side eject For Toro® .575" x 5.30" with 3/8" Mounting Diameter ID .465" OD .597" Wall .063" Length: 0 Mount Size: 0.375 Price: $12.20 Add to Order Form

Quad Tines
1QT575804 Click here for more information	INFINITY .575" side-eject Quad tine (Toro shank), 6" length x 3/8" mount, .470" ID, .595: OD, .063" wall. Length: 6 Mount Size: 0.375 Price: $11.55 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1QT575804 Click here for more information	INFINITY .575" side-eject Quad tine (Toro shank), 6" length x 3/8" mount, .470" ID, .595: OD, .063" wall. Length: 6 Mount Size: 0.375 Price: $11.55 Add to Order Form

New Products
1QT575804 Click here for more information	INFINITY .575" side-eject Quad tine (Toro shank), 6" length x 3/8" mount, .470" ID, .595: OD, .063" wall. Length: 6 Mount Size: 0.375 Price: $11.55 Add to Order Form

INFINITY tines
1QT575804 Click here for more information	INFINITY .575" side-eject Quad tine (Toro shank), 6" length x 3/8" mount, .470" ID, .595: OD, .063" wall. Length: 6 Mount Size: 0.375 Price: $11.55 Add to Order Form

New Products
1QT625103 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® .5/8" x 4 1/2" with 3/8" Mounting Diameter ID .510" OD .640" Wall .063" Length: 4.5 Mount Size: 0.375 Price: $8.30 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1QT625103 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® .5/8" x 4 1/2" with 3/8" Mounting Diameter ID .510" OD .640" Wall .063" Length: 4.5 Mount Size: 0.375 Price: $8.30 Add to Order Form

Quad Tines
1QT625103 Click here for more information	Premium SuperQuad™ Tine side eject For Toro® .5/8" x 4 1/2" with 3/8" Mounting Diameter ID .510" OD .640" Wall .063" Length: 4.5 Mount Size: 0.375 Price: $8.30 Add to Order Form

Quad Tines
1QT625803 Click here for more information	INFINITY .5/8" side-eject Quad tine (Toro shank), 4 1/2" length x 3/8" mount, .510" ID, .640" OD, .063" wall. Length: 4.5 Mount Size: 0.375 Price: $11.65 Add to Order Form

Quad Tines - Magnum Quad Plus™ Tines
1QT625803 Click here for more information	INFINITY .5/8" side-eject Quad tine (Toro shank), 4 1/2" length x 3/8" mount, .510" ID, .640" OD, .063" wall. Length: 4.5 Mount Size: 0.375 Price: $11.65 Add to Order Form

New Products
1QT625803 Click here for more information	INFINITY .5/8" side-eject Quad tine (Toro shank), 4 1/2" length x 3/8" mount, .510" ID, .640" OD, .063" wall. Length: 4.5 Mount Size: 0.375 Price: $11.65 Add to Order Form

INFINITY tines
1QT625803 Click here for more information	INFINITY .5/8" side-eject Quad tine (Toro shank), 4 1/2" length x 3/8" mount, .510" ID, .640" OD, .063" wall. Length: 4.5 Mount Size: 0.375 Price: $11.65 Add to Order Form

Conventional Coring Tines - Replaces Ryan® Parts
1R500101 Click here for more information	Premium Coring Tine 1/2" X 4 1/4" with 5/8" Mounting Diameter ID .380" OD .540" Wall .072" Length: 4.25 Mount Size: 0.625 Price: $4.05 Add to Order Form

Conventional Coring Tines - Replaces Ryan® Parts
1R500102 Click here for more information	Premium Coring Tine 1/2" X 4 1/4 " with 3/4" Mounting Diameter ID .380 OD .540" Wall .072" Length: 4.25 Mount Size: 0.75 Price: $4.05 Add to Order Form

Conventional Coring Tines - Replaces Ryan® Parts
1R500501 Click here for more information	DILLENNIUM® Coring Tine 1/2" X 4 1/2" with 5/8" Mounting Diameter ID .350" OD .525" Length: 4.5 Mount Size: 0.625 Price: $10.85 Add to Order Form

Conventional Coring Tines - Replaces Ryan® Parts
1R500502 Click here for more information	DILLENNIUM® Coring Tine 1/2" X 41/2" with 3/4" Mounting Diameter ID .350" OD .525" Wall .072" Length: 4.5 Mount Size: 0.75 Price: $10.85 Add to Order Form

Conventional Coring Tines - Replaces Ryan® Parts
1R625101 Click here for more information	Premium Coring Tine 5/8" X 4 1/4" with 3/4" Mounting Diameter ID .480" OD .650" Wall .072" Length: 4.25 Mount Size: 0.75 Price: $4.05 Add to Order Form

Conventional Coring Tines - Replaces Ryan® Parts
1R625501 Click here for more information	DILLENNIUM® Coring Tine 5/8" X 4 1/2" with 3/4" Mounting Diameter ID .485" OD .633" Wall .072" Length: 4.5 Mount Size: 0.75 Price: $10.85 Add to Order Form

Conventional Fairway Tines - Greenbay Tines
1R875102 Click here for more information	Premium Tubular Greenbay Tine 7/8" x 5.55" with 7/8" mounting diameter ID .600" OD .840" Wall .120" Length: 5.55 Mount Size: 0.875 Price: $8.60 Add to Order Form

Conventional Fairway Tines - Greenbay Tines
1R875502 Click here for more information	DILLENNIUM® Tubular Greenbay Tine 7/8" x 5.55" with 7/8" mounting diameter ID .590" OD .840" Wall .120" Length: 5.55 Mount Size: 0.875 Price: $16.60 Add to Order Form

Conventional Fairway Tines - Greenbay Tines
1RG812102 Click here for more information	Premium Greenbay coring tine 13/16" 6" Length and 3/4" Mounting Diameter ID .500" OD .735" Wall .105" Length: 6 Mount Size: 0.75 Price: $9.30 Add to Order Form

Conventional Fairway Tines - Greenbay Tines
1RG812502 Click here for more information	DILLENNIUM® Greenbay Fairway Tine. 13/16" X 6.00" with 3/4" Mounting Diameter ID .500" OD .735" Wall .105" Length: 6 Mount Size: 0.75 Price: $15.00 Add to Order Form

Conventional Fairway Tines - Greenbay Tines
1RG875102 Click here for more information	Premium Greenbay coring tine 7/8" 6" Length with 3/4" Mounting Diameter ID .575" OD .775" Wall .094" Length: 6 Mount Size: 0.75 Price: $9.20 Add to Order Form

Conventional Fairway Tines - Greenbay Tines
1RG875502 Click here for more information	DILLENNIUM® Greenbay coring tine 7/8" 6" Length with 3/4" Mounting Diameter ID .575" OD .775" Wall .094" Length: 6 Mount Size: 0.75 Price: $16.20 Add to Order Form

Conventional Coring Tines - Replaces Ryan® Parts
1RS375501 Click here for more information	DILLENNIUM® Coring Tine, Side Eject, 3/8" X 4 1/2" with 5/8" Mounting Diameter ID .270" OD .425" Wall .072" Length: 4.5 Mount Size: 0.625 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces Ryan® Parts
1RS375502 Click here for more information	DILLENNIUM® Coring Tine, Side Eject, 3/8" X 4 1/2" with 3/4" Mounting Diameter ID .270" OD .425" Wall .072" Length: 4.5 Mount Size: 0.75 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces Ryan® Parts
1RS500501 Click here for more information	DILLENNIUM® Coring Tine, Side Eject, 1/2" X 4 1/2" with 5/8" Mounting Diameter ID .350" OD .525" Wall .072" Length: 4.5 Mount Size: 0.625 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces Ryan® Parts
1RS500502 Click here for more information	DILLENNIUM® Coring Tine, Side Eject, 1/2" X 4 1/2" with 3/4" Mounting Diameter ID .350" OD .525" Wall .072" Length: 4.5 Mount Size: 0.75 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces Ryan® Parts
1RS625101 Click here for more information	Premium side eject coring tine 5/8" x 4.25" length with 3/4" mount diameter ID .480" OD .650" Wall .072" Length: 4.25 Mount Size: 0.75 Price: $5.35 Add to Order Form

New Products
1RS625101 Click here for more information	Premium side eject coring tine 5/8" x 4.25" length with 3/4" mount diameter ID .480" OD .650" Wall .072" Length: 4.25 Mount Size: 0.75 Price: $5.35 Add to Order Form

Conventional Coring Tines - Replaces Ryan® Parts
1RS625501 Click here for more information	DILLENNIUM® Coring Tine, Side Eject, 5/8" X 4 1/2 " with 3/4" Mounting Diameter ID .485" OD .633" Wall .072" Length: 4.5 Mount Size: 0.75 Price: $12.15 Add to Order Form

Conventional Fairway Tines - Greenbay Tines
1RS875102 Click here for more information	Premium Greenbay Fairway Coring Tine, Side Eject, 7/8" X 5.55" with 7/8" Mounting Diameter ID .600 OD .869" Wall .120" Length: 5.55 Mount Size: 0.875 Price: $9.30 Add to Order Form

Conventional Fairway Tines - Greenbay Tines
1RS875502 Click here for more information	DILLENNIUM® Greenbay Fairway Coring Tine, Side Eject, 7/8" X 5 1/2" with 7/8" Mounting Diameter ID .590" OD .840" Wall .120" Length: 5.55 Mount Size: 0.875 Price: $19.80 Add to Order Form

Conventional Fairway Tines - Greenbay Tines
1RS875802 Click here for more information	INFINITY 7/8" Side-Eject Greenbay Tine 5.55" length x 7/8" mount; .600" ID, .869" OD, .120" wall Length: 0 Mount Size: 0.875 Price: $18.80 Add to Order Form

Conventional Fairway Tines
1RS875802 Click here for more information	INFINITY 7/8" Side-Eject Greenbay Tine 5.55" length x 7/8" mount; .600" ID, .869" OD, .120" wall Length: 0 Mount Size: 0.875 Price: $18.80 Add to Order Form

INFINITY tines
1RS875802 Click here for more information	INFINITY 7/8" Side-Eject Greenbay Tine 5.55" length x 7/8" mount; .600" ID, .869" OD, .120" wall Length: 0 Mount Size: 0.875 Price: $18.80 Add to Order Form

New Products
1RS875802 Click here for more information	INFINITY 7/8" Side-Eject Greenbay Tine 5.55" length x 7/8" mount; .600" ID, .869" OD, .120" wall Length: 0 Mount Size: 0.875 Price: $18.80 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1T500101 Click here for more information	Premium Coring Tine 1/2" X 4 3/4" with 3/4" Mounting Diameter ID .385" OD .560" Wall .072" Length: 4.75 Mount Size: 0.75 Price: $4.05 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1T500102 Click here for more information	Premium Coring Tine 1/2" x 5 1/2" with 3/4" mounting diameter. ID .390" OD .557" Wall .072" Length: 5.5 Mount Size: 0.75 Price: $4.50 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1T500105 Click here for more information	Premium Coring Tine 1/2" x 6" with 3/4" mounting diameter. Length: 6 Mount Size: 0.75 Price: $4.50 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1T500501 Click here for more information	DILLENNIUM® Coring Tine 1/2" X 5" with 3/4" Mounting Diameter ID .350" OD .525" Wall .072" Length: 5 Mount Size: 0.75 Price: $10.85 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1T500502 Click here for more information	DILLENNIUM® Coring Tine 1/2" x 5 3/4" with 3/4" mounting diameter ID .350" OD .525" Wall .072" Length: 5.75 Mount Size: 0.75 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1T500505 Click here for more information	DILLENNIUM® Coring Tine 1/2" x 6 1/4" with 3/4" mounting diameter. ID .350" OD .525" Wall .072" Length: 6.25 Mount Size: 0.75 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1T500801 Click here for more information	INFINITY 1/2" Top-Eject tine 4 3/4" length, 3/4" mount; .385" ID, .560" OD, .072" wall. Length: 4.75 Mount Size: 0.75 Price: $9.85 Add to Order Form

New Products
1T500801 Click here for more information	INFINITY 1/2" Top-Eject tine 4 3/4" length, 3/4" mount; .385" ID, .560" OD, .072" wall. Length: 4.75 Mount Size: 0.75 Price: $9.85 Add to Order Form

Conventional Coring Tines
1T500801 Click here for more information	INFINITY 1/2" Top-Eject tine 4 3/4" length, 3/4" mount; .385" ID, .560" OD, .072" wall. Length: 4.75 Mount Size: 0.75 Price: $9.85 Add to Order Form

INFINITY tines
1T500801 Click here for more information	INFINITY 1/2" Top-Eject tine 4 3/4" length, 3/4" mount; .385" ID, .560" OD, .072" wall. Length: 4.75 Mount Size: 0.75 Price: $9.85 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1T625101 Click here for more information	Premium Coring Tine 5/8" X 4 3/4" with 3/4" Mounting Diameter ID .480" OD .650" Wall .072" Length: 4.75 Mount Size: 0.75 Price: $4.05 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1T625102 Click here for more information	Premium Coring Tine 5/8" x 5 1/2" with 3/4" mounting diameter. ID .490" OD .655" Wall .072" Length: 5.5 Mount Size: 0.75 Price: $4.50 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1T625105 Click here for more information	Premium coring tine 5/8" x 6" with 3/4" mounting diameter. ID .490" OD .655" Wall .072" Length: 6 Mount Size: 0.75 Price: $4.50 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1T625501 Click here for more information	DILLENNIUM® Coring Tine 5/8" X 5" with 3/4" Mounting Diameter ID .485" OD .633" Wall .072" Length: 5 Mount Size: 0.75 Price: $10.85 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1T625502 Click here for more information	DILLENNIUM® Coring Tine 5/8" x 5 3/4" with 3/4" mounting diameter. ID .485" OD .633" Wall .072" Length: 5.75 Mount Size: 0.75 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1T625505 Click here for more information	DILLENNIUM® Coring Tine 5/8" x 6 1/4" with 3/4" mounting diameter. ID .485" OD .633" Wall .072" Length: 6.25 Mount Size: 0.75 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1T625801 Click here for more information	INFINITY 5/8" Top-Eject tine 4 3/4" length, 3/4" mount; .480" ID, .650" OD, .072" wall. Length: 4.75 Mount Size: 0.75 Price: $9.85 Add to Order Form

New Products
1T625801 Click here for more information	INFINITY 5/8" Top-Eject tine 4 3/4" length, 3/4" mount; .480" ID, .650" OD, .072" wall. Length: 4.75 Mount Size: 0.75 Price: $9.85 Add to Order Form

Conventional Coring Tines
1T625801 Click here for more information	INFINITY 5/8" Top-Eject tine 4 3/4" length, 3/4" mount; .480" ID, .650" OD, .072" wall. Length: 4.75 Mount Size: 0.75 Price: $9.85 Add to Order Form

INFINITY tines
1T625801 Click here for more information	INFINITY 5/8" Top-Eject tine 4 3/4" length, 3/4" mount; .480" ID, .650" OD, .072" wall. Length: 4.75 Mount Size: 0.75 Price: $9.85 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1T750101 Click here for more information	Premium Coring Tine 3/4" X 5" length with 7/8" Mounting Diameter ID .550" OD .770" Wall .095" Length: 5 Mount Size: 0.875 Price: $4.50 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1T750501 Click here for more information	DILLENNIUM® Coring Tine 3/4" X 5 1/4" with 7/8" Mounting Diameter ID .535" OD .745" Wall .095" Length: 5.25 Mount Size: 0.875 Price: $12.05 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1T750502 Click here for more information	DILLENNIUM® Coring Tine 3/4" x 6 1/4" with 7/8" mounting diameter. ID .535" OD .745" Wall .095" Length: 6.25 Mount Size: 0.875 Price: $13.35 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1TS375501 Click here for more information	DILLENNIUM® Coring Tine side eject 3/8" X 5" with 3/4" Mounting Diameter ID 270" OD .425" Wall .072" Length: 5 Mount Size: 0.75 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1TS500102 Click here for more information	Premium 1/2" Coring Tine, side eject 5 1/2" x 3/4" Mount Diameter ID .390" OD .550" Wall .072" Length: 5.5 Mount Size: 0.75 Price: $5.35 Add to Order Form

New Products
1TS500102 Click here for more information	Premium 1/2" Coring Tine, side eject 5 1/2" x 3/4" Mount Diameter ID .390" OD .550" Wall .072" Length: 5.5 Mount Size: 0.75 Price: $5.35 Add to Order Form

New Products
1TS500105 Click here for more information	Premium 1/2" Coring Tine, side eject 6" x 3/4" Mount Diameter ID .390" OD .550" Wall .072" Length: 6 Mount Size: 0.75 Price: $0.00 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1TS500105 Click here for more information	Premium 1/2" Coring Tine, side eject 6" x 3/4" Mount Diameter ID .390" OD .550" Wall .072" Length: 6 Mount Size: 0.75 Price: $0.00 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1TS500501 Click here for more information	DILLENNIUM® Coring Tine side eject 1/2" X 5" with 3/4" Mounting Diameter ID .350" OD .525" Wall .072" Length: 5 Mount Size: 0.75 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1TS500502 Click here for more information	DILLENNIUM® Coring Tine side eject 1/2" x 5 3/4" with 3/4" mounting diameter. ID .350" OD .525" Wall .072" Length: 5.75 Mount Size: 0.75 Price: $13.35 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1TS500505 Click here for more information	DILLENNIUM® Coring Tine side eject 1/2" x 6 1/4" with 3/4" mounting diameter. Length: 6.25 Mount Size: 0.75 Price: $13.35 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1TS625102 Click here for more information	Premium 5/8" Coring Tine, side eject 5 1/2" x 3/4" Mount Diameter ID .490" OD .655" Wall .072" Length: 5.5 Mount Size: 0.75 Price: $5.35 Add to Order Form

New Products
1TS625102 Click here for more information	Premium 5/8" Coring Tine, side eject 5 1/2" x 3/4" Mount Diameter ID .490" OD .655" Wall .072" Length: 5.5 Mount Size: 0.75 Price: $5.35 Add to Order Form

New Products
1TS625105 Click here for more information	Premium 5/8" Coring Tine, side eject 6" x 3/4" Mount Diameter ID .490" OD .655" Wall .072" Length: 6 Mount Size: 0.75 Price: $5.35 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1TS625105 Click here for more information	Premium 5/8" Coring Tine, side eject 6" x 3/4" Mount Diameter ID .490" OD .655" Wall .072" Length: 6 Mount Size: 0.75 Price: $5.35 Add to Order Form

Conventional Coring Tines
1TS625105 Click here for more information	Premium 5/8" Coring Tine, side eject 6" x 3/4" Mount Diameter ID .490" OD .655" Wall .072" Length: 6 Mount Size: 0.75 Price: $5.35 Add to Order Form

Conventional Coring Tines
1TS625106 Click here for more information	Premium 5/8" Coring Tine, side eject 6 1/4" x 3/4" Mount Diameter ID .490" OD .655" Wall .072" Length: 6.25 Mount Size: 0.75 Price: $5.15 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1TS625106 Click here for more information	Premium 5/8" Coring Tine, side eject 6 1/4" x 3/4" Mount Diameter ID .490" OD .655" Wall .072" Length: 6.25 Mount Size: 0.75 Price: $5.15 Add to Order Form

New Products
1TS625106 Click here for more information	Premium 5/8" Coring Tine, side eject 6 1/4" x 3/4" Mount Diameter ID .490" OD .655" Wall .072" Length: 6.25 Mount Size: 0.75 Price: $5.15 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1TS625501 Click here for more information	DILLENNIUM® Coring Tine side eject 5/8" X 5" with 3/4" Mounting Diameter ID .485" OD .633" Wall .072" Length: 5 Mount Size: 0.75 Price: $12.15 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1TS625502 Click here for more information	DILLENNIUM® Coring Tine side eject 5/8" x 5 3/4" with 3/4" mounting diameter. ID .485" OD .633" Wall .072" Length: 5.75 Mount Size: 0.75 Price: $13.35 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1TS625505 Click here for more information	DILLENNIUM® Coring Tine side eject 5/8" x 6 1/4" with 3/4" mounting diameter. Length: 6.25 Mount Size: 0.75 Price: $13.35 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1TS625506 Click here for more information	DILLENNIUM® 5/8" Coring Tine, side eject 6 1/2" x 3/4" Mount Diameter ID .485" OD .633" Wall .072" Length: 0 Mount Size: 0.75 Price: $13.75 Add to Order Form

New Products
1TS625506 Click here for more information	DILLENNIUM® 5/8" Coring Tine, side eject 6 1/2" x 3/4" Mount Diameter ID .485" OD .633" Wall .072" Length: 0 Mount Size: 0.75 Price: $13.75 Add to Order Form

Conventional Coring Tines
1TS625506 Click here for more information	DILLENNIUM® 5/8" Coring Tine, side eject 6 1/2" x 3/4" Mount Diameter ID .485" OD .633" Wall .072" Length: 0 Mount Size: 0.75 Price: $13.75 Add to Order Form

Conventional Coring Tines
1TS750102 Click here for more information	Premium 3/4" Coring Tine, side eject 6" x 7/8" Mount Diameter ID .585" OD .775" Wall .095" Length: 6 Mount Size: 0.875 Price: $5.50 Add to Order Form

New Products
1TS750102 Click here for more information	Premium 3/4" Coring Tine, side eject 6" x 7/8" Mount Diameter ID .585" OD .775" Wall .095" Length: 6 Mount Size: 0.875 Price: $5.50 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1TS750102 Click here for more information	Premium 3/4" Coring Tine, side eject 6" x 7/8" Mount Diameter ID .585" OD .775" Wall .095" Length: 6 Mount Size: 0.875 Price: $5.50 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1TS750501 Click here for more information	DILLENNIUM® Coring Tine side eject 3/4" X 5 1/4" with 7/8" Mounting Diameter ID .535" OD .745" Wall .095" Length: 5.25 Mount Size: 0.875 Price: $13.35 Add to Order Form

Conventional Coring Tines - Replaces Toro® Parts
1TS750502 Click here for more information	DILLENNIUM® Coring Tine side eject 3/4" x 6 1/4" with 7/8" mounting diameter. ID .535" OD .745" Wall .095" Length: 6.25 Mount Size: 0.875 Price: $14.30 Add to Order Form

New Products
1WT100101 Click here for more information	Premium 1" x 10 1/2" deep coring tine with 12mm dimple mounting diameter and 8" working depth for Wiedenmann. ID .626" OD 1.00" Wall .120" Length: 0 Mount Size: 0.472 Price: $24.40 Add to Order Form

Deep Tines
1WT100101 Click here for more information	Premium 1" x 10 1/2" deep coring tine with 12mm dimple mounting diameter and 8" working depth for Wiedenmann. ID .626" OD 1.00" Wall .120" Length: 0 Mount Size: 0.472 Price: $24.40 Add to Order Form

Deep Tines - Wiedenmann® Deep Tines
1WT100101 Click here for more information	Premium 1" x 10 1/2" deep coring tine with 12mm dimple mounting diameter and 8" working depth for Wiedenmann. ID .626" OD 1.00" Wall .120" Length: 0 Mount Size: 0.472 Price: $24.40 Add to Order Form

Deep Tines - Wiedenmann® Deep Tines
1WT100102 Click here for more information	Premium 1" x 12 1/2" deep coring tine with 18mm mounting diameter and 10" working depth for Wiedenmann. ID .626" OD 1.00" Wall .120" Length: 12.25 Mount Size: 0.742 Price: $28.40 Add to Order Form

Deep Tines - Wiedenmann® Deep Tines
1WT100104 Click here for more information	Premium 1" x 10 1/2" deep coring tine with 1:10 cone mount and 8" working depth for Wiedenmann. ID .626" OD 1.00" Wall .120" Length: 0 Mount Size: 0 Price: $26.40 Add to Order Form

Deep Tines
1WT100104 Click here for more information	Premium 1" x 10 1/2" deep coring tine with 1:10 cone mount and 8" working depth for Wiedenmann. ID .626" OD 1.00" Wall .120" Length: 0 Mount Size: 0 Price: $26.40 Add to Order Form

New Products
1WT100104 Click here for more information	Premium 1" x 10 1/2" deep coring tine with 1:10 cone mount and 8" working depth for Wiedenmann. ID .626" OD 1.00" Wall .120" Length: 0 Mount Size: 0 Price: $26.40 Add to Order Form

Deep Tines - Wiedenmann® Deep Tines
1WT100502 Click here for more information	DILLENNIUM® 1" x 12 3/4" deep coring tine with 3/4" mounting diameter and 10 1/4" working depth for Wiedenmann®. ID .590" OD 1.00" Wall .120" Length: 12.75 Mount Size: 0.75 Price: $39.75 Add to Order Form

Deep Tines - Wiedenmann® Deep Tines
1WT375101 Click here for more information	Premium 3/8" x 6" deep coring tine with 5/16" mounting diameter and 4.82" working depth for Wiedenmann®. ID .220" OD .410" Wall .049" Length: 6 Mount Size: 0.3125 Price: $12.05 Add to Order Form

Deep Tines - Wiedenmann® Deep Tines
1WT375102 Click here for more information	Premium 3/8" x 6 1/8" deep coring tine with 12mm mounting diameter and 4.82" working depth for Wiedenmann®. ID .220" OD .410" Wall .049" Length: 6 Mount Size: 0.472 Price: $12.05 Add to Order Form

Deep Tines - Wiedenmann® Deep Tines
1WT500102 Click here for more information	Premium 1/2" x 6" deep coring tine with 12mm mounting diameter and 5" working depth for Wiedenmann®. ID .336" OD .520" Wall .055" Length: 6 Mount Size: 0.472 Price: $14.75 Add to Order Form

Deep Tines - Wiedenmann® Deep Tines
1WT625102 Click here for more information	Premium 5/8" x 8.264" deep coring tine with 12mm mounting diameter and 7.969" working depth. For Wiedenmann®. ID .400" OD .625" Wall .072" Length: 8.265 Mount Size: 0.472 Price: $14.75 Add to Order Form

Deep Tines - Wiedenmann® Deep Tines
1WT625502 Click here for more information	DILLENNIUM® 5/8" x 8 1/2" deep coring tine with 12mm mounting diameter and 7 1/4" working depth. For Wiedenmann®. ID .350" OD .625" Wall .072" Length: 8.5 Mount Size: 0.5 Price: $19.15 Add to Order Form

Deep Tines - Wiedenmann® Deep Tines
1WT812101 Click here for more information	Premium 13/16" x 11.3" deep coring tine with 18mm mounting diameter and 10" working depth for Wiedenmann®. ID .510" OD .812" Wall .105" Length: 0 Mount Size: 0 Price: $22.95 Add to Order Form

Deep Tines - Wiedenmann® Deep Tines
1WT812102 Click here for more information	Premium 13/16" x 9 1/2" deep coring tine with 18mm mounting diameter and 8" working depth. for Wiedenmann®. Length: 9.5 Mount Size: 0.742 Price: $22.95 Add to Order Form

Deep Tines - Wiedenmann® Deep Tines
1WT812103 Click here for more information	Premium 13/16" deep coring tine x 7.30" total length with 12mm mount diameter, 6" working depth for Wiedenmann® ID .510" OD .812" Wall .105" Length: 7.3 Mount Size: 0.472 Price: $16.95 Add to Order Form

Deep Tines - Wiedenmann® Deep Tines
1WT812104 Click here for more information	Premium 13/16" Wiedenmann® deep coring tine x 10" total length with 1:10 cone mount, 8" working depth. ID .510" OD .812" Wall .105" Length: 0 Mount Size: 0 Price: $31.15 Add to Order Form

New Products
1WT812104 Click here for more information	Premium 13/16" Wiedenmann® deep coring tine x 10" total length with 1:10 cone mount, 8" working depth. ID .510" OD .812" Wall .105" Length: 0 Mount Size: 0 Price: $31.15 Add to Order Form

Deep Tines
1WT812104 Click here for more information	Premium 13/16" Wiedenmann® deep coring tine x 10" total length with 1:10 cone mount, 8" working depth. ID .510" OD .812" Wall .105" Length: 0 Mount Size: 0 Price: $31.15 Add to Order Form

Deep Tines
1WT812105 Click here for more information	Premium 13/16" Wiedenmann® deep coring tine x 10" total length with 12mm mount diameter, 8" working depth. ID .510" OD .812" Wall .105" Length: 0 Mount Size: 0.472 Price: $22.95 Add to Order Form

New Products
1WT812105 Click here for more information	Premium 13/16" Wiedenmann® deep coring tine x 10" total length with 12mm mount diameter, 8" working depth. ID .510" OD .812" Wall .105" Length: 0 Mount Size: 0.472 Price: $22.95 Add to Order Form

Deep Tines - Wiedenmann® Deep Tines
1WT812105 Click here for more information	Premium 13/16" Wiedenmann® deep coring tine x 10" total length with 12mm mount diameter, 8" working depth. ID .510" OD .812" Wall .105" Length: 0 Mount Size: 0.472 Price: $22.95 Add to Order Form

Deep Tines - Wiedenmann® Deep Tines
1WT812501 Click here for more information	DILLENNIUM® 13/16" x 11.55" deep coring tine with 18mm mounting diameter and 10 1/4" working depth for Wiedenmann®. ID .490" OD .812" Wall .105" Length: 0 Mount Size: 0.742 Price: $31.15 Add to Order Form

Deep Tines - Wiedenmann® Deep Tines
1WT812502 Click here for more information	DILLENNIUM® 13/16" x 12" deep coring tine with 18mm mounting diameter and 10 1/2" working depth for Wiedenmann®. ID .490" OD .812" Wall .105" Length: 12 Mount Size: 0.742 Price: $31.15 Add to Order Form

Deep Tines - Wiedenmann® Deep Tines
1WT812503 Click here for more information	DILLENNIUM® 13/16" deep coring tine x 7.30" total length with 12mm mount diameter, 6" working depth for Wiedenmann® ID .490" OD .812" Wall .105" Length: 0 Mount Size: 0.472 Price: $25.15 Add to Order Form

Deep Tines - Wiedenmann® Deep Tines
1WT812504 Click here for more information	DILLENNIUM 13/16" Wiedenmann® deep coring tine x 10 1/4" total length with 1:10 cone mount, 8 1/4" working depth. ID .490" OD .812" Wall .105" Length: 8.25 Mount Size: 0 Price: $31.15 Add to Order Form

New Products
1WT812504 Click here for more information	DILLENNIUM 13/16" Wiedenmann® deep coring tine x 10 1/4" total length with 1:10 cone mount, 8 1/4" working depth. ID .490" OD .812" Wall .105" Length: 8.25 Mount Size: 0 Price: $31.15 Add to Order Form

Deep Tines
1WT812504 Click here for more information	DILLENNIUM 13/16" Wiedenmann® deep coring tine x 10 1/4" total length with 1:10 cone mount, 8 1/4" working depth. ID .490" OD .812" Wall .105" Length: 8.25 Mount Size: 0 Price: $31.15 Add to Order Form

Deep Tines
1WT812505 Click here for more information	DILLENNIUM 13/16" Wiedenmann® deep coring tine x 10 1/4" total length with 12mm mount diameter, 8 1/4" working depth. ID .490" OD .812" Wall .105" Length: 8.25 Mount Size: 0.472 Price: $31.15 Add to Order Form

New Products
1WT812505 Click here for more information	DILLENNIUM 13/16" Wiedenmann® deep coring tine x 10 1/4" total length with 12mm mount diameter, 8 1/4" working depth. ID .490" OD .812" Wall .105" Length: 8.25 Mount Size: 0.472 Price: $31.15 Add to Order Form

Deep Tines - Wiedenmann® Deep Tines
1WT812505 Click here for more information	DILLENNIUM 13/16" Wiedenmann® deep coring tine x 10 1/4" total length with 12mm mount diameter, 8 1/4" working depth. ID .490" OD .812" Wall .105" Length: 8.25 Mount Size: 0.472 Price: $31.15 Add to Order Form

Conventional Solid Tines - Conventional Solid Tines
2A625101 Click here for more information	Aerivator Solid Tine 5/8" x 4.63" with threaded mounting diameter. OD .586" Solid Wall Length: 4.63 Mount Size: 0 Price: $3.95 Add to Order Form

Conventional Solid Tines
2B625101 Click here for more information	Premium Bayonet™ Tine, 5/8" rib X 5 1/2" with 3/8" Mounting Diameter Width .750" Thickness .190" Length: 5.5 Mount Size: 0.375 Price: $10.61 Add to Order Form

Conventional Solid Tines - Bayonet™ Tines
2B625101 Click here for more information	Premium Bayonet™ Tine, 5/8" rib X 5 1/2" with 3/8" Mounting Diameter Width .750" Thickness .190" Length: 5.5 Mount Size: 0.375 Price: $10.61 Add to Order Form

New Products
2B625101 Click here for more information	Premium Bayonet™ Tine, 5/8" rib X 5 1/2" with 3/8" Mounting Diameter Width .750" Thickness .190" Length: 5.5 Mount Size: 0.375 Price: $10.61 Add to Order Form

Conventional Solid Tines - Bayonet™ Tines
2B750110 Click here for more information	Premium Bayonet™ 3/4" Rib X 4 3/4" with 3/8" Mount. Width .750 Thickness .190 Length: 4.75 Mount Size: 0.375 Price: $10.61 Add to Order Form

Conventional Solid Tines
2B750110 Click here for more information	Premium Bayonet™ 3/4" Rib X 4 3/4" with 3/8" Mount. Width .750 Thickness .190 Length: 4.75 Mount Size: 0.375 Price: $10.61 Add to Order Form

Conventional Solid Tines - Bayonet™ Tines
2B750111 Click here for more information	Premium Bayonet™ Tine 3/4" rib X 4 3/4" with 1/2" Mounting Diameter Width .750" Thickness .190" Length: 4.75 Mount Size: 0.5 Price: $10.61 Add to Order Form

Conventional Solid Tines - Bayonet™ Tines
2B750112 Click here for more information	Premium Bayonet™ Tine 3/4" rib X 4 3/4" with 5/8" Mounting Diameter Width .750" Thickness .190" Length: 4.75 Mount Size: 0.625 Price: $10.61 Add to Order Form

Conventional Solid Tines
2B750112 Click here for more information	Premium Bayonet™ Tine 3/4" rib X 4 3/4" with 5/8" Mounting Diameter Width .750" Thickness .190" Length: 4.75 Mount Size: 0.625 Price: $10.61 Add to Order Form

Conventional Solid Tines
2B750113 Click here for more information	Premium Bayonet™ Tine 3/4" rib X 4 3/4" with 3/4" Mounting Diameter Width .750" Thickness .190" Length: 4.75 Mount Size: 0.75 Price: $10.61 Add to Order Form

Conventional Solid Tines - Bayonet™ Tines
2B750113 Click here for more information	Premium Bayonet™ Tine 3/4" rib X 4 3/4" with 3/4" Mounting Diameter Width .750" Thickness .190" Length: 4.75 Mount Size: 0.75 Price: $10.61 Add to Order Form

Conventional Solid Tines - Bayonet™ Tines
2B750114 Click here for more information	Premium Bayonet™ Tine 3/4" rib X 4 3/4" with 7/8" Mounting Diameter Width .750" Thickness .190" Length: 4.75 Mount Size: 0.875 Price: $10.61 Add to Order Form

Conventional Solid Tines
2B750114 Click here for more information	Premium Bayonet™ Tine 3/4" rib X 4 3/4" with 7/8" Mounting Diameter Width .750" Thickness .190" Length: 4.75 Mount Size: 0.875 Price: $10.61 Add to Order Form

Conventional Solid Tines - Bayonet™ Tines
2B750115 Click here for more information	Premium Bayonet™ Tine, 3/4" rib X 4 3/4" with 12MM Mounting Diameter Width .750" Thickness .190" Length: 4.75 Mount Size: 0.472 Price: $10.61 Add to Order Form

Conventional Solid Tines - Bayonet™ Tines
2B750116 Click here for more information	Premium Bayonet™ Tine, 3/4" rib X 4 3/4" with 18MM Mounting Diameter Width .750" Thickness .190" Length: 4.75 Mount Size: 0.742 Price: $10.61 Add to Order Form

Conventional Solid Tines
2B750116 Click here for more information	Premium Bayonet™ Tine, 3/4" rib X 4 3/4" with 18MM Mounting Diameter Width .750" Thickness .190" Length: 4.75 Mount Size: 0.742 Price: $10.61 Add to Order Form

Conventional Solid Tines
2B750121 Click here for more information	Premium Bayonet™ Tine, 3/4" rib X 7" with 1/2" Mounting Diameter Width .750" Thickness .190" Length: 7 Mount Size: 0.5 Price: $13.92 Add to Order Form

Conventional Solid Tines - Bayonet™ Tines
2B750121 Click here for more information	Premium Bayonet™ Tine, 3/4" rib X 7" with 1/2" Mounting Diameter Width .750" Thickness .190" Length: 7 Mount Size: 0.5 Price: $13.92 Add to Order Form

Conventional Solid Tines - Bayonet™ Tines
2B750123 Click here for more information	Premium Bayonet™ Tine, 3/4" rib X 7" with 3/4" Mounting Diameter Width .750" Thickness .190" Length: 7 Mount Size: 0.75 Price: $13.92 Add to Order Form

Conventional Solid Tines
2B750123 Click here for more information	Premium Bayonet™ Tine, 3/4" rib X 7" with 3/4" Mounting Diameter Width .750" Thickness .190" Length: 7 Mount Size: 0.75 Price: $13.92 Add to Order Form

Conventional Solid Tines
2B750124 Click here for more information	Premium Bayonet